|Topic Review (Newest First)|
|03-23-2019 10:20 PM|
|milomir||did some testing with prime95, memtest64 and super pi and it seems to be stable|
|03-23-2019 07:30 PM|
|white owl||It's not really about what the ram can take, it's about what the memory controller can take. Though I never hear about people degrading them so who really knows?|
|03-23-2019 07:06 PM|
HCI Memtest is free, easy to use, and, well, no ad wall.
I didnt say get rid of ram. I simply meant remove the fast ram for the duration of testing overclocks with the slow ram.
Once you find what it is capable of, you can have some fun.
Or you can leave it at 1600mhz for both kits.
DDR3 ram is specifically required to survive 1.9 volts, though it is NOT required to be STABLE. That is ACTUAL voltage, and not "BIOS set" voltage. example, 1.65v in my BIOS (asus crosshair v formula z) is actually about 1.635 volts at the ram as tested.
|03-23-2019 01:31 PM|
to test for memory stability.... this specifically, without torching CPU
open that link with an adblocker though! adblockplus is great
|03-23-2019 11:55 AM|
|white owl||Yes, use a custom test and set it to use about 70% of your ram. I'd use 26.6 or disable AVX but that's up to you.|
|03-23-2019 11:51 AM|
1.5v is JDEC, the ram temps really don't matter here. The limiting factor with ram is safe voltage instead of thermals, you aren't even close to an unsafe voltage. If you plug in 1.65 you could probably get more speed if it's a decent kit, make sure it's actually stable though.
what should i use to test stability? is prime95 good for the job?
|03-23-2019 11:39 AM|
|white owl||1.5v is JDEC, the ram temps really don't matter here. The limiting factor with ram is safe voltage instead of thermals, you aren't even close to an unsafe voltage. If you plug in 1.65 you could probably get more speed if it's a decent kit, make sure it's actually stable though.|
|03-23-2019 11:27 AM|
|03-23-2019 10:13 AM|
i've no idea *** i'm doing but i just upped the dram voltage to 1.5 and changed ram frequency to 1600mhz and it works?
can this kill the ram?
is there any way to monitor ram temperature?
it's using the same timings it used when it run at 1333mhz
|03-23-2019 09:32 AM|
getting rid of the ram is not an option. i need 16gb of ram and this is the only kit i could get as i'm broke atm.
i'll just run it at 1333mhz to be safe then
thanks for the help guys
|This thread has more than 10 replies. Click here to review the whole thread.|