|Topic Review (Newest First)|
|06-05-2019 01:16 AM|
Well thats pretty good actually. Well within the average for most 1080Ti's. Max I can do on my MSI is 2063Mhz at 1.093v.
I don't think XOC is actually that beneficial. We can't even use XOC on an air cooled card anyway (safely) and if you're custom water already then it seems the cards shouldn't throttle themselves if your loop is big enough to keep them cool enough, even without using XOC.
EDIT: Fixed some Mhz typos.. I must of been drunk when I first wrote this post. I have no idea where I got 2088 from with the previous page and this post. My card maxes out at 2025 Mhz now on stock bios.
|06-05-2019 12:22 AM|
|06-05-2019 12:16 AM|
With XOC I was able to run it at 2126 Mhz @ 1.200v (and yes my card needed that voltage to do it... it wouldn't run 2100+ Mhz at all without it) and +700 memory. Now on stock bios it runs 2012 - 2088 Mhz and I can still keep the +700 memory. So not terrible. So far it's been okay for a few months like this.
|06-04-2019 09:25 AM|
oh, apparently it requires an oscillator and some soldering? (did a quic kgooglefu)
I guess it would depend on the fan type, above is for PWM i assume...
however, I'd assume most cards use PWM fans these days.
|06-04-2019 08:39 AM|
|06-04-2019 04:04 AM|
XOC is fine, as long as you limit the voltage to 1.093V and just use the "no power limit" feeling.
Like kithylin said, 1.2V is not healthy on the long turn
|06-04-2019 01:09 AM|
My 1080 Ti suffered degradation after running XOC bios daily @ 1.200v core voltage for 17 months. I didn't fry it totally. But I did do some damage to it. Even if I removed the software overclock (completely just stopped loading MSI Afterburner at all on start up so it never applied any kind of overclock) the card still would just completely crash to desktop instantly in any game I tried under any load and wouldn't do anything, when running on the XOC Bios. I had to flash back to the stock bios and reduce the overclock to get it to still run now.
|06-04-2019 12:44 AM|
|06-04-2019 12:42 AM|
|06-04-2019 12:37 AM|
|This thread has more than 10 replies. Click here to review the whole thread.|