Overclock.net - An Overclocking Community - Reply to Topic

Thread: PSU age and voltage rail question Reply to Thread
Title:
Message:

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in


  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
04-19-2019 05:07 PM
gordesky1 Yea never go by software readings... Check out one of my systems that is under load on the cpu and 2 gpus 24/7 readings. power and cooling 750watt no issues at all. Checked with my volt tester on the 12v and 5v rail and the 12v is at a solid 12.05v 5 volt is at a 5 also.

http://prntscr.com/nedvgm

Some boards are just buggy and dont show right like the sabbertooft r2 am3..
04-18-2019 12:30 AM
shilka Software readings are extremely inaccurate so if you want any kind of accurate reading use a digtal multi meter
04-17-2019 05:44 PM
The Pook Seasonic PSUs do not buzz lol. if any PSU has "buzzing/whining" noises then it's faulty.

a pump is not going to draw enough power to make any difference as to what PSU you should/shouldn't buy.

http://www.jonnyguru.com

Read through some reviews and pick what fits in your budget. Seasonic Focus/Focus Plus are highly rated but if you're going to ignore that brand entirely because of some loopy logic then there's still a ton of other good options.
04-17-2019 05:42 PM
Hydroplane Usually the voltage goes down over time, not up
04-17-2019 05:37 PM
Robostyle Yeah, and corsair units are the only one for me that meet all the requirements, especially buzzing/whining one - stuff I hate in seasonics.

It’s just 5V and especially 3.3V rail that disturb me much. For example, my EK pump feeds from 5V...
04-17-2019 03:42 PM
wingman99 My Cosair HX 620 has been running 24/7 for 11 years no problems. Corsair is a good PSU brand and usually safe when it fails.

Corsair RM750i has a 10 year warranty.
04-17-2019 03:29 PM
Robostyle
PSU age and voltage rail question

Didn't found general PSU thread "about everything"


Couple of days ago I've noticed voltage supply deviation reported in HWinfo - I thought so cause it was....more "stricted" before. Planning to doublecheck that with hardware - friend of mine has one.

But at this moment I'm just curious. So, here's the stuff:

Corsair RM750i, 3.5 years old
Under load (max 450W), these figures I see:
12V rail: min 11.984V, max 12.047V (average current ~30A)
5V rail: min 5.078V, max 5.109V (average current ~5A)
3.3V rail: min 3.375V, max 3.406V (average current ~2A)

I know it's still far away from ATX tolerance standarts, though I surely can say it was better not long before. So, is it like "PSU is getting old and gonna die in year or two", smth like that? Just want to avoid situation when PSU kills itself and takes half of the rig with it - it's easier to start looking for a replacement from now.

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off