|Topic Review (Newest First)|
|06-24-2019 11:19 AM|
|skupples||most air coolers use 1s, or larger, while blocks use 1s n smaller. LOL, some of these nasty blowers use 3mm pads.|
|06-24-2019 12:13 AM|
I know it is a 1080TI Owner's club, but it popped up in google search when I searched for Total GPU power (normalized) (% of TDP) :)
I have an Asus strix 1080 (no OC, everything is on the factory settings, never tried OCing it) and my normalized TDP jumps up when I am in game to 200-400%. Is that normal?
I hope you can open the picture.
Thanks for the help!
|06-23-2019 05:27 AM|
0.5mm, but they were shrunk under pressure. I think I should go with 1mm pads. Thanks.
|06-23-2019 02:07 AM|
|Streetdragon||looks like 0,5mm thick pads, but im not sure|
|06-23-2019 01:55 AM|
Hey, guys! There is Gigabyte 1080ti Gaming OC cooling system photo:
Is it possible to identify thermal pads thickness by this photo?
|06-05-2019 01:16 AM|
Well thats pretty good actually. Well within the average for most 1080Ti's. Max I can do on my MSI is 2063Mhz at 1.093v.
I don't think XOC is actually that beneficial. We can't even use XOC on an air cooled card anyway (safely) and if you're custom water already then it seems the cards shouldn't throttle themselves if your loop is big enough to keep them cool enough, even without using XOC.
EDIT: Fixed some Mhz typos.. I must of been drunk when I first wrote this post. I have no idea where I got 2088 from with the previous page and this post. My card maxes out at 2025 Mhz now on stock bios.
|06-05-2019 12:22 AM|
|06-05-2019 12:16 AM|
With XOC I was able to run it at 2126 Mhz @ 1.200v (and yes my card needed that voltage to do it... it wouldn't run 2100+ Mhz at all without it) and +700 memory. Now on stock bios it runs 2012 - 2088 Mhz and I can still keep the +700 memory. So not terrible. So far it's been okay for a few months like this.
|06-04-2019 09:25 AM|
oh, apparently it requires an oscillator and some soldering? (did a quic kgooglefu)
I guess it would depend on the fan type, above is for PWM i assume...
however, I'd assume most cards use PWM fans these days.
|06-04-2019 08:39 AM|
|This thread has more than 10 replies. Click here to review the whole thread.|