|Topic Review (Newest First)|
|06-16-2019 09:41 AM|
Been having an issue with this board that I've been unable to diagnose/fix for months now, maybe someone else here will have had the same...
Basically, whatever is in my M.2_2 slot randomly disconnects/freezes. It usually happens when I'm running something demanding (in my case, Battlefield V). I've tried both a 660p (NVME) and an SU800 (SATA) and they both do the exact same thing. Anyone else experienced this? It's a really strange issue but it's happened across multiple drives so I know it's not that. It's annoying to the point where I'm just going to switch brands and get an x570 board when they come out, and RMA this board and sell it. I have the latest BIOS, (4804) the latest windows build (1903) and all the latest drivers I can find.
So... anyone else?
|06-13-2019 01:41 AM|
|06-11-2019 04:51 AM|
|MishelLngelo||Anybody using Macrium Reflect with 4804 BIOS ? I can't get MR rescue USB or RE to run. Boots but locks up computer right after it BOOTs. Picture is there but nothing reacts.|
|06-09-2019 02:53 AM|
Asus is already informed about this issue and the ACPI problem. We are waiting for a fix now. So far i know this problem exists since first ComboAM4 Bios.
Haven't heard something about your second problem so far. At least not on Windows based systems.
|06-09-2019 12:03 AM|
Update AGESA to ComboAM4 18.104.22.168 for the upcoming processors.
Please notice that this version of BIOS can only be updated via EZ Flash.
Haven't tested it now.
My issue with 4804 is that on boot, before the ASUS logo is shown, I see for 1-2 seconds an empty screen with a cursor in upper lefter corner. This hasn't happened before with any BIOS version.
|06-07-2019 08:28 PM|
Mmm... Good to know. Right now at 3333 my latency is 60ns... I might try higher speeds with loser timings and see of the latency increases...
|06-07-2019 05:28 PM|
|umeng2002||Mmm... Good to know. Right now at 3333 my latency is 60ns... I might try higher speeds with loser timings and see of the latency increases...|
|06-07-2019 10:39 AM|
|06-07-2019 01:51 AM|
|MishelLngelo||I like to have everything running at best efficiency and it's good (as in doesn't hurt) to have as fast memory with lowest possible Cl but Cl is not making much difference in overall performance, not enough to sacrifice stability, cause need for higher voltage or having to work hard just for it. There are some applications that can make use of lower Cl and some that do not. Cl16 to Cl14 for instance, would show only in memory benchmarks, so other than that, hardly worth the effort.|
|06-06-2019 10:29 PM|
M kingston 3600 is rated at Cl18 at that frequency according to it's XMP yet works at Cl16 in 4602 BIOS. Although it's b-die, any attempts to lower CL have not been successful. I will flash 4804 shortly and see what happens.
I'm using exactly this setting. Only the SCL is 2 well place of 3.
Do you think it would be worth it run at CL15 or CL16 for 3400 or higher? Technically the latency is worth that CL14 at 3333.
|This thread has more than 10 replies. Click here to review the whole thread.|