|Topic Review (Newest First)|
|10-18-2019 10:42 PM|
Here is my new LLT DRAM Timings
|10-18-2019 10:26 PM|
Uhhh, no friggin way. That started happening to me in the past 2 days. I've just been using my Bluetooth Headphones, however this is interesting.
Also, possibly extremely annoying as I have two high end gaming systems right now and have to sell one. I decided to keep the i9-9900K/Asus Maximus XI Extreme combo over the AMD combo.
However..... Anyone buying the AMD Combo with my CH6 will likely have issues with the audio too. Obviously, this is completely unacceptable to sell in this condition.
I'm going to have to test to see if something has gone wrong with the board, as well as physically look it over too. Damn. I was really hoping it wasn't a hardware issue, I actually get pops and clicks only.
Not sure if this is the feedback you mentioned. I suppose I should have asked this immediately. Lol. Let me know?
Also, to what you said about bringing new life into the board.... Absolutely, I love doing this. I've done it since I was a teenager with upgrades. Back then it was more of a financial need than a test like I have done here.
Honestly though, I am BAFFLED as to why this isn't common knowledge already. There's no write ups about it anywhere and even when I made this post, with proof here and other places.... The response was pretty lackluster. I expected, because of the lack of literally ANY proof online apart from mine here would make some people quite happy. Ahh well, good intentions. 🙂
It does work though. I have not had a single issue man. Nothing. I'm no Engineer, however I really do believe that the First x16 PCI-E slots will work in PCI-E 4.0 mode with a Radeon 5700/XT. I'd be very surprised if it didn't because the m.2 slot is much further away and there are no issues with the length of the traces. Which is what was told to all of us by AMD themselves, if there was going to be issues, the trace length or other issues with the traces themselves would be at fault. So because the m.2 linked to the CPU works even that far away, it stands to reason the first PCI-E x16 will likely work at 4.0 as well. Possibly even the 2nd slot as well.
The options for 4.0 being enabled are (from top to bottom) First x16 Slot, Second x16 Slot, m.2 Slot. All the other options for PCI-E Generation are limited to 3.0. I wouldn't be completely surprised if the CH6's potential PCI-E 4.0 Slots were all populated, in 4.0 mode with no issues.
I also wouldn't be surprised if only 1 or 2 device/s worked in PCI-E 4.0 mode and adding another Gen4 device/s is exactly what made AMD say what they did. There has been NO publicly done testing aside from my leap of faith with this SSD. Hehe.
It's the best board I have ever owned. There also hasn't wver been any problems with Ryzen 3000 that any other board hasn't had. I assume you are referring to the widespread boosting issue.
This is fixed for the majority of people in BIOS 7501. You do lose PCI-E 4.0 support with any BIOS past 7201 though, for me (for obvious reasons) that's a deal breaker.
BIOS 7201 is not as good as BIOS 7501 for RAM overclocking though. Personally can verify this. 3733mhz max with 7201, 3800mhz max with 7501. Karu Memtest.
|10-18-2019 04:32 AM|
any other ryzen 1xxx and 2xxx owners waiting on Zen3 to upgrade their CPUs? I see little reason to upgrade to zen2 considering the performance I am getting with my 2700X.
Hopefully, Asus supports zen3 on x370 motherboard (hopefully BIOS size won't be the limiting factor..)
My SS starts on Feb 2020 and I will have my ITR by then too, but I may just wait until Zen 3 comes out and get the whole shebang, new MB, CPU, and maybe DDR5 will be out by then?
|10-18-2019 12:31 AM|
|Jesaul||Abba has increased latency by 3ms for me from 63 to 66.|
|10-18-2019 12:28 AM|
any other ryzen 1xxx and 2xxx owners waiting on Zen3 to upgrade their CPUs? I see little reason to upgrade to zen2 considering the performance I am getting with my 2700X
hopefully Asus supports zen3 on x370 motherboard (hopefully BIOS size wont be the limiting factor..)
|10-17-2019 06:09 PM|
|roco_smith||I have my Crosshair VI Extreme Ryzen 3900X with 4 stick Bdie 8GB x 4 at 3800 mhz Flck at 1900 with good Timmings at 60s. May be the kit that you have doesn't go any more further. Mine are Corsair Samsung Bdie|
|10-17-2019 10:12 AM|
Hmm no matter what i do i can't get 3733mhz 4x8 B-die to boot, i just get a black screen, i already found the most stable RZQ/cadbus with 3666 completely stable with a latency of 64.7ns, does this mean that the cpu in question just can't do 3733mhz with 4 ram sticks, or could it be something else?
Probably the case of 4 mem sticks - it is more troublesome for the CPU to handle them.
You should be happy - it is a really good result!
|10-17-2019 08:55 AM|
|Yviena||Hmm no matter what i do i can't get 3733mhz 4x8 B-die to boot, i just get a black screen, i already found the most stable RZQ/cadbus with 3666 completely stable with a latency of 64.7ns, does this mean that the cpu in question just can't do 3733mhz with 4 ram sticks, or could it be something else?|
|10-17-2019 12:05 AM|
Noise from CPU socket.
Hello guys, may I ask you if you have same noise as me or not? My system is Asus hero vi and ryzen 3600. I can hear this noise 50 cm away from pc. I have ssd and all fans off. Asus said That I should send my board under the warranty, but I know how there service bad is and Asus forum is quite. I used 2 PSU and 2 different coolers but the noise is the same. The noise is coming from backplate area. Thank you. https://drive.google.com/open?id=1LY...nbsMD_GD7gTsNH
|10-16-2019 01:50 PM|
Weird bug since installing a 3700X
I've been using this board since it came out with a 1700 but recently upgraded to the 3700X. Works fine, quite noticable imporvement in VR games.
But ever since upgrading the CPU my GPU (2080 Trio) fans go to max if it reaches 71-72C. GPU fan control works perfectly as long as it's below that temperature but once it reaches that the fan control stops working and the fans on the GPU go to 100%. Nothing else changed on the PC, just the CPU. Tried all the BIOS versions that work with 3rd gen and they are all the same. The GPU works fine in another PC even when reaching 71-72C so that is okay too. Doesn't matter if i have custom fan curve or not, OC or stock (both the GPU and everything in the BIOS as well). CPU never goes above 60C when gaming, most of the time it's at 50-55. Completely stable, no crashes or artifacts but sounds like a jet engine if it gets hot.
Has any1 seen something like this before?
|This thread has more than 10 replies. Click here to review the whole thread.|