|Topic Review (Newest First)|
|07-25-2019 01:16 PM|
|TheMeatHead1||I have the thermal take riser card from that review, but this little plastic cover on the male-pci slot side touches the adjacent Bykski gpu water block (plexi glass part). If I removed that plastic cover block thingy shown in circled area (that represents similar shape on the male pci slot side [not pictured]), would it be okay? Or would it interfere with the signal?|
|07-25-2019 08:04 AM|
|JackCY||Or you could put the GPU on an extender to get access to ports below.|
|07-24-2019 02:22 PM|
several of those adapter blades look like they don't need more than the width of the slot (not whole bracket).
a couple of those cheap ones (1,3,4) did ok in tests. that red bracket might be close towards the key (by the i/o bracket) but i'm sure if you loosened the screws to that gpu, you might gain 1mm gently pushing a little then tightening back down. but it does look to have the wiggle room to push a blade in that slot.
pretty sure the waterblock and plastic/cheap blue tape on the extensions can live so close/touching to each other.
|07-24-2019 02:07 PM|
|07-23-2019 06:33 PM|
Then you have to search for angled ones from some of the companies that do make raisers at all.
If all fails buy a cheap one and make it angled.
|07-23-2019 10:53 AM|
A 45 degree angled low-profile riser card of some kind would fit PERFECT....especially in this top 8x pci-e slot.
|07-22-2019 04:18 PM|
|07-21-2019 11:27 PM|
nvme SSD PCIe x4 low profile Extension Cable?
Does anyone know of a good low profile and flexible PCIe x4 extension cable that will fit in this PCIe x4 slot between my gpu's?
I ask because my bykski water block covers the outer edge portion of the slot, but it looks like a slim-flexible-low-profile riser cable of some kind could fit. I need this to fit a NVME SSD PCIe x4 adapter card.