Overclock.net - An Overclocking Community - Reply to Topic
Thread: [OFFICIAL] ASRock X570 Overclocking and Support Thread Reply to Thread
Title:
Message:

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in


  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
01-25-2020 01:22 PM
maisermunster
Of module speed

I used to build my rig from Asrock x570 Extreme4 motherboard and G.Skill Trident Z RGB DDR4 3600Mhz 32Gt. Module name is: F4-3600C16-16GTZNC. Memories are in dual channel mode in motherboard.
Processor in build is Amd Ryzen 3700x.
As you already guess what i am going to ask, and yes my question is about memory speed.
I have put in xmp option in bios. Ive also raised modules volts to 1,350V (sorry, English is not my mothers tongue so have patience in me).
Memory is not in QVL list on Asrock site. Well there were only one or two kits wit 32Gt capacity in it.

So the real question is what settings i have to change at UEFI?

I bought these mem after i read this: - AMD Ryzen series CPUs (Matisse): DDR4 4666+(OC) / 4400(OC) / 4300(OC) / 4266(OC) / 4200(OC) / 4133(OC) / 3466(OC) / 3200 / 2933 / 2667 / 2400 / 2133 MHz
So i started to think that if AMD Ryzen series CPUs (Matisse) can handle DDR4 4666+ (OC) and if in Asrocks homepage they support others modules up to max 4400Mhz why cant they support 3600Mhz?
That was also the reason i bought those 2x16Gb modules because they were between 4666+(OC) and 2133MHz.
01-25-2020 01:21 PM
maisermunster I used to build my rig from Asrock x570 Extreme4 motherboard and G.Skill Trident Z RGB DDR4 3600Mhz 32Gt. Module name is: F4-3600C16-16GTZNC. Memories are in dual channel mode in motherboard.
Processor in build is Amd Ryzen 3700x.
As you already guess what i am going to ask, and yes my question is about memory speed.
I have put in xmp option in bios. Ive also raised modules volts to 1,350V (sorry, English is not my mothers tongue so have patience in me).
Memory is not in QVL list on Asrock site. Well there were only one or two kits wit 32Gt capacity in it.

So the real question is what settings i have to change at UEFI?

I bought these mem after i read this: - AMD Ryzen series CPUs (Matisse): DDR4 4666+(OC) / 4400(OC) / 4300(OC) / 4266(OC) / 4200(OC) / 4133(OC) / 3466(OC) / 3200 / 2933 / 2667 / 2400 / 2133 MHz
So i started to think that if AMD Ryzen series CPUs (Matisse) can handle DDR4 4666+ (OC) and if in Asrocks homepage they support others modules up to max 4400Mhz why cant they support 3600Mhz?
That was also the reason i bought those 2x16Gb modules because they were between 4666+(OC) and 2133MHz.
01-24-2020 12:55 PM
ziocomposite
Quote: Originally Posted by Animeleptic View Post
How do you find your Mobo PPT, TDC, EDC spec to enter into the PBO Advanced \ Motherboard fields ?
No clue where this info is for the "motherboard" limits. Saw that in the bios but don't use PBO so have it disabled. I feel the chip sticks to defaults regardless at max or lesser when using ECO.

Quote: Originally Posted by chas1723 View Post
Is anyone else having issue with their taichi hanging on boot with an 8d post code? Sometimes it will set my bios back to default on memory speed. This started happening with every bios after 2.11. This board was rock solid up to that bios. I really don't want to go backwards with bios revisions but I may if I can't find out why it is doing this.
It's happened to me a couple of times but it may be related to me trying to use lower timings with safe voltages for my RAM.
01-24-2020 12:17 PM
Animeleptic
Quote: Originally Posted by chas1723 View Post
Is anyone else having issue with their taichi hanging on boot with an 8d post code? Sometimes it will set my bios back to default on memory speed. This started happening with every bios after 2.11. This board was rock solid up to that bios. I really don't want to go backwards with bios revisions but I may if I can't find out why it is doing this.

Sent from my SM-N950U using Tapatalk
Sounds like a voltage issue from my experience but on the X570 Aqua when OCing. It's either SOC or RAM voltage being too low.

Durring different weather conditions when ambient temps are lower you can run lower voltage, but when ambient temps go up voltage needs to be raised.
01-24-2020 11:22 AM
chas1723 Is anyone else having issue with their taichi hanging on boot with an 8d post code? Sometimes it will set my bios back to default on memory speed. This started happening with every bios after 2.11. This board was rock solid up to that bios. I really don't want to go backwards with bios revisions but I may if I can't find out why it is doing this.

Sent from my SM-N950U using Tapatalk
01-23-2020 06:46 PM
Animeleptic How do you find your Mobo PPT, TDC, EDC spec to enter into the PBO Advanced \ Motherboard fields ?
01-23-2020 05:26 PM
ziocomposite Try taking one out of the chain as that could be the issue.

Also had a splitter at one point since the plan was to also have the 2x Phanteks Neons but the neons had dead spots so ended up returning the splitter/neons.

When using the splitter everything was working fine. 3 fans in series for one input and 2 neons in series for another then from the splitter to the ARGB header.
01-23-2020 11:26 AM
hanzy
Quote: Originally Posted by ziocomposite View Post
Yes, would highly suggest testing each DRGB piece separately to troubleshoot. At least in my scenario my first orders of Luxes I ended up returning. Only because Amazon shipped the wrong ones (4 Pin). Checked my order details and yep, was supposed to get the 3 pin ones but they messed up.
I ordered a Phanteks aRGB controller just in case. I don't want to take it all apart and put back together twice.
I wonder if its the fact that I have four of the Digital Luxe rings daisy chained. This Phanteks controller seems to recommend having only two or three daisy chained/in series per output/channel.
01-23-2020 04:31 AM
TwilightRavens
Quote: Originally Posted by coccosoids View Post
Is anybody running a triple gpu setup on this board (or any x570 for that matter)?!


I honestly thought about trying that with some 290X’s since they are pretty cheap now once I get mine all set up.
01-22-2020 01:33 PM
coccosoids Is anybody running a triple gpu setup on this board (or any x570 for that matter)?!
This thread has more than 10 replies. Click here to review the whole thread.

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off