|Topic Review (Newest First)|
|10-16-2019 02:58 AM|
After update to F6E... Are u kidding me? Why ssd on cheap b350 motherboards work better than on x570 aorus pro? I updated and reset bios several times. I tried different versions. Made a clean install of windows and got it.
|10-16-2019 12:57 AM|
Have you tried to do an install onto a sata drive?
Also, could you prep an nvme device for install by first zeroing the drive.
|10-16-2019 12:53 AM|
I have tried F6C, but with no luck.
MB: X570 Pro
RAM: 2x G.SKILL Trident Z RGB Neo 16GB Kit 3600 MHz CL14 (F4-3600C14D-16GTZN)
Primary SSD: Intel Optane 900P 280 GB, U.2 with M.2 adapter plugged to M2A_SOCKET (SSDPE21D280GASM)
OS: Windows 10 Pro 1903 with all updates and AMD chipset drivers 18.104.22.1683, fast startup disabled
Non-OS SSD: Samsung 970 Pro 1 TB M.2 plugged to M2B_SOCKET
SATA SSD: WD Blue 2 TB (WDS200T2B0A)
SATA HDD: HGST Deskstar NAS 10 TB
SATA Optical: some random LG burner HL-DT-ST BD-RE GGW-H20L
My original BIOS is F4 that works kind of normal (more to that later).
When I flash to F6C then immediately after the reboots I can see Intel Optane as boot device in BIOS:
It is also listed in the devices with all details:
The only change I make in BIOS is to disable onboard audio (not to interfere with my USB card). Everything else is default, no XMP, no overclocking.
First boot to Windows is fine, however as soon as I reboot again, boot device is gone and the boot will fail with error "Reboot and select proper boot device or insert boot media in selected boot device and press a key."
When i enter BIOS Intel Optane is no longer listed as boot device:
However it is still visible in device details:
Power cycling, restarting, loading defaults - nothing helps. It will not boot.
When I flash the BIOS back to F4, it behaves in similar way (Optane is visible before first boot, after reboot from Windows it disappears), but with the difference that the system boots normally even if Optane is not listed in boot devices.
It is a pity since I was looking forward to ABBA. I hope that they can fix it soon...
|10-16-2019 12:09 AM|
|10-15-2019 11:41 PM|
Installed F7e, everything still works and I haven't noticed any changes, unfortunate I still have the laggy bios with CSM disabled and need to default to the low res version, not a big deal but a little annoying.
Edit: after looking at some of the posts above i checked my storage performance (960 Evo) as I never bothered to look at it since switching to AMD and well.... its really bad.
|10-15-2019 11:23 PM|
|10-15-2019 10:56 PM|
|10-15-2019 10:54 PM|
|10-15-2019 10:43 PM|
|MrToast99||What I'm having issues with is I updated SIV (B19.0522.1) through the app center to B19.0926.1 and now it won't launch... I've even uninstalled and reinstalled B19.0522.1 and it wouldn't load, nothing happens. F7c and F7e X570 Master.|
|10-15-2019 10:38 PM|
|MrToast99||The link worked for me... F7e for X570 Master|
|This thread has more than 10 replies. Click here to review the whole thread.|