|Topic Review (Newest First)|
|11-15-2019 06:11 PM|
Have started optimizing my R7 3800X for single core execution.
Cinebench R20 Single Core- 531
|11-15-2019 08:58 AM|
8 Cores, 16 Threads
RAM Gskill XFlare - 3200MHz 14-14-14-34, Samsung B-Die.
Spent few days running through BIOS, turning caches on, turning diagnostic and ECC tools off. I can still up the RAM frequency a bit to 3466MHz without any problem.
|11-14-2019 11:27 PM|
|11-01-2019 07:37 PM|
Ryzen 3800X @ 4.475Ghz
Cinebench R20 score 5456
|10-30-2019 01:22 AM|
|pyblackout||yeah, with increased BCLK I can't get any geekbench results because the benchmarks internal timer differs from my high precision timer, which is affected by the clock change.|
|10-29-2019 09:46 PM|
I cant run my BCLK up at all. Tried that method and it wont throttle but everything else on my ASUS R6E deosnt like it. Ethernet will quit working, drive speeds go in the toilet etc. Even a bump to 101 has an adverse effect.
Yeah, on (somewhat) older setups like X99 2011v3 and Z170, I can still easily hit 103.5 and sometimes more like 104.x, even with SLI, but my newer setups bark at anything more than + 0.2 FSB
|10-29-2019 09:01 PM|
|10-29-2019 01:01 PM|
I can't go over 102.0 due to tdp throttling
Enabled some prefetchers
New Score: 17503
There is still some throttling will work on it
|10-29-2019 12:17 PM|
48 c / 96t @102 bus, nice
|10-29-2019 12:11 PM|
XEON 8260 without power throttling
|This thread has more than 10 replies. Click here to review the whole thread.|