|Topic Review (Newest First)|
|03-31-2020 06:00 AM|
|03-30-2020 12:59 PM|
|toolmaker03||well I got my memory, so all that remains is the CPU for this build.|
|03-24-2020 12:58 AM|
|toolmaker03||well I did order my memory, I got two sticks, as memory keeps going up, almost on a weekly basis now. it might be here next month, or it might be here six months from now. in truth I really do not know when, or if, it will be delivered at all. all I can do now, is wait and see what happens.|
|03-11-2020 08:03 PM|
I had a older version of the water cooled TEC system by swiftech, kind of like this one but with the MCW50 water block.
I fried my K7 system with condensation caused by that setup.
well, seasonic just released their new line of power supplies the connect series, and I hope that I can get one for sale, by the end of this year. it would solve a lot of the little issues I am having, with the current wiring setup I have for power.
|03-08-2020 03:25 PM|
...a little blast from the past, re-tested on Ryzen 3800
|03-08-2020 03:17 PM|
|toolmaker03||well, after looking at the motherboard, all the VRM's are tightly packed around the CPU, this is why the mono-block seemed small to me.|
|02-27-2020 12:07 PM|
|Simmons572||Nope, I am running X399. I was just hoping to help contribute somehow. Looks like you've got a solid gameplan!|
|02-27-2020 11:53 AM|
Do you know what the mounting specs are for that chipset? From what I remember, these mobo vendors like to use differently spec'd mounting holes for their VRM coolers.
well I have a mono block, so yes I can give you a distance between the mounting holes. the offset is a little harder to get right. what I do normally, is get a set of VRM blocks for a similar board, and ether re-drill the mounting holes,(if possible) or I will use thermal epoxy to mount them to the motherboard.
if you have a gigabyte master Z390 board, I would be happy to measure the distance between the mounting holes. so that it makes choosing VRM blocks for modification easier.
|02-27-2020 08:09 AM|
|Simmons572||Do you know what the mounting specs are for that chipset? From what I remember, these mobo vendors like to use differently spec'd mounting holes for their VRM coolers.|
|02-22-2020 09:02 PM|
|toolmaker03||ok, so now that we know what, motherboard I am using. I have a mono block for the CPU and VRMS, I have a memory water block. I need a south bridge water block for the Z390 gigabyte master motherboard. do you guys have any south bridge water blocks that you would recommend? ( I have no issues with thermal epoxying the water block to the south bridge chip if necessary. )|
|This thread has more than 10 replies. Click here to review the whole thread.|