Overclock.net - An Overclocking Community

Overclock.net - An Overclocking Community (https://www.overclock.net/forum/)
-   Intel CPUs (https://www.overclock.net/forum/5-intel-cpus/)
-   -   *Official* Intel DDR4 24/7 Memory Stability Thread (https://www.overclock.net/forum/5-intel-cpus/1569364-official-intel-ddr4-24-7-memory-stability-thread.html)

[email protected] 08-21-2015 01:44 AM

GSkill Ripjaws V DDR4-3600 2 X 4GB kit at XMP but CR1 set manually on Maximus VIII Hero (all default voltages):





Silent Scone 08-21-2015 02:23 AM

thumb.gif

[email protected] 08-21-2015 09:24 AM

Raja--i5-6700K @4.2/4.1---DDR4-3733-C18-19-47-1T----1.40v---SA Auto & IO Auto ---Stressapptest----2 Hours


Deders 08-27-2015 01:06 AM

Quote:
Originally Posted by [email protected] View Post

Raja--i5-6700K @4.2/4.1---DDR4-3733-C18-19-47-1T----1.40v---SA Auto & IO Auto ---Stressapptest----2 Hours

Does the SA and IO auto adjust on these boards like vcore? Wondering the same for LLC, someone said they got best results from leaving it on auto. I'm using the z170 Deluxe.

[email protected] 08-27-2015 01:07 AM

Quote:
Originally Posted by Deders View Post

Does the SA and IO auto adjust on these boards like vcore? Wondering the same for LLC, someone said they got best results from leaving it on auto. I'm using the z170 Deluxe.

Yep, Auto is "automatic".

Silent Scone 08-27-2015 02:19 AM

Quote:
Originally Posted by Deders View Post

Does the SA and IO auto adjust on these boards like vcore? Wondering the same for LLC, someone said they got best results from leaving it on auto. I'm using the z170 Deluxe.


I had no trouble dialling in 3000 and 3200 with auto, I set a lower manual system agent to see what I could get away with. If there's no instability whilst in auto there is no real reason to change this. Might need to play with it above these speeds though on some cpus, I've yet to try

seechay 08-27-2015 06:15 AM

I'm having issues posting on the stock XMP of my RAM. On reboots I sometimes get d0, but just restarting again I'll come boot fine after "Resetting my overclock settings by pressing F1." I haven't begun to overclock yet, because of this. Additionally my boot time is incredibly slow going through post. Anyone have any ideas? @[email protected]? I'm using 2 sets of F4-3000C15D-16GVR and the rest of my info is in my sig. When letting my bios auto adjust my ram, it sets it to 2133 with 1.2v. I just updated my bios to 0508 using the EZUpdate last night and it didn't change anything.

[email protected] 08-27-2015 06:20 AM

Quote:
Originally Posted by seechay View Post

I'm having issues posting on the stock XMP of my RAM. On reboots I sometimes get d0, but just restarting again I'll come boot fine after "Resetting my overclock settings by pressing F1." I haven't begun to overclock yet, because of this. Additionally my boot time is incredibly slow going through post. Anyone have any ideas? @[email protected]? I'm using 2 sets of F4-3000C15D-16GVR and the rest of my info is in my sig. When letting my bios auto adjust my ram, it sets it to 2133 with 1.2v. I just updated my bios to 0508 using the EZUpdate last night and it didn't change anything.


Two sets of DRAM is likely the issue. Remove one set. XMP is not made for two sets, it is made for one.

seechay 08-27-2015 06:54 AM

I'll try that out when I get home. If that's the case, can I just manually set the speed, timings and voltage to get it to work? Or do I need to get a quad channel kit?

[email protected] 08-27-2015 06:59 AM

Quote:
Originally Posted by seechay View Post

I'll try that out when I get home. If that's the case, can I just manually set the speed, timings and voltage to get it to work? Or do I need to get a quad channel kit?

You can try, but there are no promises it will work at the rated timings, frequency and voltage of a single kit. You may need to tune a lot to get both kits stable.

I would avoid 4 DIMM kits binned for X99 for similar purpose - look for a Z170 4 DIMM memory kit if you want a single kit.


All times are GMT -7. The time now is 01:50 PM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.