Overclock.net - An Overclocking Community

Overclock.net - An Overclocking Community (https://www.overclock.net/forum/)
-   AMD Motherboards (https://www.overclock.net/forum/11-amd-motherboards/)
-   -   Asus Prime B350-Plus and G.Skill Flare X RAM @ 3200MHz (https://www.overclock.net/forum/11-amd-motherboards/1628272-asus-prime-b350-plus-g-skill-flare-x-ram-3200mhz.html)

Bloke 04-17-2017 02:08 PM

I just wanted to share my findings I picked up from another user over at Asus Forums.

Like most, I've had a hard time with my ram and this board but I have found these settings stable on my Asus PRIME B350 - PLUS with my G.Skill Flare X F4-3200C14D-16GFX:



DOCP Speed 3200 MHz

VDDRCR SOC @ 1.1500v

DRAM @ 1.3900v

VTTDDR @ 0.6750v

ProcODT @ 48 Ohms

My ram timings are 14-14-14-34 T1



On this board, I had to first activate the DOCP settings which auto raised the VDDRCR SOC voltage to 1.1 from the default 0.9. This allowed me to raised the voltage by the extra 0.05 needed otherwise I would have been limited to raising it by only 0.20 from the 0.90 default if I did not activate DOCP profile.

I hope this will help someone that's had the same problems!

bikerkip 04-22-2017 06:40 AM

Hi Bloke

This was exactly what I needed to my RAM (same set you are using) to work at 3200Mhz on the same board and processor.....

Thanks for the help

Kip

nomsodmilk 10-14-2017 07:34 AM

And both of you successfully operated at 3200MHz? If so, I think I need full detail of BIOS setting, Actually I own ASRock X370 Professional Gaming with Galax 3600MHz, but I've just helped my friend built one AMD Ryzen 5 1600 with ASUS Prime B350-Plus and G.Skill Flare X 3200MHz kit.

zerowar 11-19-2018 09:12 AM

Hi, I have the same motherboard and ram with the Ryzen 7 1700X. When I set the default DOCP with 3200MHZ my PC keeps restarting. I had to edit the DOCP profile and change it to 3000MHZ in order turn on. Is the normal ? I need to edit any settings in 3200MHZ profile in order to get it working ?

zyxel16 01-16-2019 09:31 AM

Bloke are you still use same system?

zyxel16 01-29-2019 10:27 AM

Did you find any solution I am using there ram in same motherboard 2933 mhz when I push it 3200 . My windows boot but when I log in to games it crashes always.

Kolistirva 04-13-2019 02:20 PM

Quote:

Originally Posted by Bloke (Post 26023277)
I just wanted to share my findings I picked up from another user over at Asus Forums.


Like most, I've had a hard time with my ram and this board but I have found these settings stable on my Asus PRIME B350 - PLUS with my G.Skill Flare X F4-3200C14D-16GFX:




DOCP Speed 3200 MHz


VDDRCR SOC @ 1.1500v


DRAM @ 1.3900v


VTTDDR @ 0.6750v


ProcODT @ 48 Ohms


My ram timings are 14-14-14-34 T1




On this board, I had to first activate the DOCP settings which auto raised the VDDRCR SOC voltage to 1.1 from the default 0.9. This allowed me to raised the voltage by the extra 0.05 needed otherwise I would have been limited to raising it by only 0.20 from the 0.90 default if I did not activate DOCP profile.


I hope this will help someone that's had the same problems!

Hello dear friend I have prime b350 plus and 1600x, same ram.

I use last bios 4602, I doesn't working 3200. Always BSOD help us great one.

uKER 04-26-2019 10:21 PM

Quote:

Originally Posted by Bloke (Post 26023277)
I just wanted to share my findings I picked up from another user over at Asus Forums.

Like most, I've had a hard time with my ram and this board but I have found these settings stable on my Asus PRIME B350 - PLUS with my G.Skill Flare X F4-3200C14D-16GFX:

You are a true hero, man.

I purchased my Ryzen 1700 in February 2017 when they launched, together with some Corsair Vengeance LPX C14 memory as I had heard Ryzens liked C14 memory.
Never had any sort of success getting it to even boot at 3200.

Eventually I bit the bullet, sold them and got some G.Skill Ripjaws V with B-die memory.
These at least booted just by selecting DOCP, but they were not 100% stable, games crashing to the desktop every few hours, and memory tests throwing errors.
And trust me, I had tried everything you can imagine. Won't go into too much detail here, but believe me I did.

Now, I don't know how I got to your post, but it was my salvation.
It was these settings that got my machine running 3200 MHz 100% stable for the first time.

BTW, strangely, my Ripjaws V appear to be quite close to your Flares.
They are F4-3200C14D-8GVK. Probably the same as yours, only rebadged flare and probably with slightly different XMP programming.

Now, here's this. Hopefully I can give back something for giving me this info.
Did you know that loading the XMP on this motherboard's BIOS only loads about half of the timing values specified by the memory, and you can get quite a bit of extra performance by entering the whole thing?

Also, out of curiosity, could you provide a screenshot of Ryzen Timing Checker?
Here's the link to get it.

In any case, thanks again for sharing this!

rdr09 04-27-2019 12:24 AM

Thank you op - +rep. I followed these settings for my G.Skill Ripjaws CL16 and so far so good. I'll be doing more tests (HCI and all the games I play) today. Before, I can only set this kit to 2933 MHz.

My Flares, though, have no issue running 3200 DOCP on both my X470 Pro and B350 Strix. It's this Ripjaw that's giving pain just getting it to run at its manufacturer's spec.


In case you want to know, 3200 CL 16 DOCP scores a 74 ns in Aida latency test, while the Flares at 3200 CL14 DOCP gets a 67 ns.

uKER 04-27-2019 12:25 AM

Quote:

Originally Posted by rdr09 (Post 27947198)
Thank you op - +rep. I followed these settings for my G.Skill Ripjaws CL16 and so far so good. I'll be doing more tests (HCI and all the games I play) today. Before, I can only set this kit to 2933 MHz.

My Flares, though, have no issue running 3200 DOCP on both my X470 Pro and B350 Strix. It's this Ripjaw that's giving pain just getting it to run at its manufacturer's spec.

Can you post a screenshot of Ryzen Timing Checker with the Flares?
Thanks in advance.


All times are GMT -7. The time now is 07:14 AM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.