Overclock.net - An Overclocking Community

Overclock.net - An Overclocking Community (https://www.overclock.net/forum/)
-   NVIDIA (https://www.overclock.net/forum/69-nvidia/)
-   -   Evga FTW3 GTX 1080 Ti Owner's Thread (https://www.overclock.net/forum/69-nvidia/1631796-evga-ftw3-gtx-1080-ti-owners-thread.html)

Caos 06-06-2017 12:38 PM

Thread of evga ftw3, share your OC, temperatures, problems, solutions

Warning: Spoiler! (Click to show)




PCI Express 3.0


Chipset Manufacturer

GPU Series
NVIDIA GeForce GTX 10 Series

GeForce GTX 1080 Ti

Core Clock
1569 MHz

Boost Clock
1683 MHz

CUDA Cores


Effective Memory Clock
11016 MHz

Memory Size

Memory Interface

Memory Type


DirectX 12

OpenGL 4.5


1 x HDMI 2.0b

Multi-Monitor Support

3 x DisplayPort 1.4

1 x Dual-Link DVI-D


Max Resolution
7680 x 4320

SLI Support
2-Way SLI

Virtual Reality Ready

With Fan

Operating Systems Supported
Windows 10 32/64bit, Windows 8 32/64bit, Windows 7 32/64bit

System Requirements
600 Watts or greater power supply.
PCI Express, PCI Express 2.0 or PCI Express 3.0 compliant motherboard with one graphics slot.

Power Connector
2 x 8-Pin or 6+2-Pin

Dual-Link DVI Supported

HDCP Ready


Simultaneous Multi-Projection

VR Ready


NVIDIA SLI w/ HB Bridge Support


NVIDIA GameStream

NVIDIA GPU Boost 3.0

Microsoft DirectX 12

Vulkan API

OpenGL 4.5 Support

Max Digital Resolution - 7680 x 4320

HDMI 2.0b, DisplayPort 1.4 and Dual-Link DVI

Built for EVGA Precision XOC

Asynchronous Fans

9 additional temp sensors to monitor Memory and VRM

GPU / Memory / PWM Thermal Status Indicator LEDs

New vented heatsink fin design and pin fins for optimized airflow

Safety fuse to protect components from damage due to improper installation or other component failures

Redesigned cooling with L-shaped contact fins to improve contact surface area for better heat dissipation

EVGA iCX Technology

Form Factor & Dimensions

Max GPU Length
300 mm

Card Dimensions (L x H)
11.80" x 5.62"

Slot Width
Dual Slot

pictures of me ftw3

somebadlemonade 06-06-2017 03:04 PM

I should probably take a few pics of mine in the core 500 I have it in. . .

Looks almost like I need to loosen the belt on the case, like I do after Thanksgiving dinner.

I haven't even gotten around to learning how to overclock newer video cards, much less pascal, I'll read a guide in the next few days so I don't feel like I'm going to fry the thing. Trying to overclock it without knowing how.

roberta507 06-06-2017 03:38 PM

Just set mine up
To early to post O/C results
Took a lot pics prior to installation

Caos 06-06-2017 05:31 PM

Max OC Core

In BF1 drops to 2050 mhz.

AngryLobster 06-06-2017 08:32 PM

Mines on the way. Just curious if a onwer out there can set the fan speed to a fixed 1400RPM and report temps?

I don't need it at 64C and would even accept 74C if it meant being much quieter.

somebadlemonade 06-06-2017 09:20 PM

Originally Posted by AngryLobster View Post

Mines on the way. Just curious if a onwer out there can set the fan speed to a fixed 1400RPM and report temps?

I don't need it at 64C and would even accept 74C if it meant being much quieter.

Different climates, ambient temperatures, cases and fan locations all effect temperatures, the only way you would know if it were to hit those temperatures is to do the testing yourself sadly.

And if temperatures are your main focus set the fan profile you want, and use the temperature target feature, mine hardly gets that hot or noisy in my mitx case but the card is drawing in air from outside the case, granted I haven't even tried to do all that much with it yet.

FUZZFrrek 06-06-2017 10:20 PM

Hi there fellas, just bought one and it should be around at the end of the week! I am hyped to play with it!

roberta507 06-07-2017 12:05 AM

4k results
2050/GPU Stable ...Memory/6003 ...Voltage127/75%[email protected]%
Temps reached a max of 53 degrees which prevented it from scaling back to 2037

AngryLobster 06-08-2017 06:48 PM

I just got mine and am wondering if anyone else experiences wonky fan behavior (revving up to max momentarily) when using Afterburner. I haven't even touched the fan profile but it does this.

Installing Precision X fixes it. Does it mean I'm forced to use EVGA's software?

kciN 06-08-2017 11:10 PM

Just got mine today and honestly I'm not very happy with it. Biggest annoyance for me right now is how awful the rgb leds are. It's basically impossible to get anything close to white, which is all I want. Now I just figured out that Afterburner can only control one of the fans so if you want a custom curve on all 3 fans you have to use Precision X. And of course it can hardly overclock at all, max I can get is 1987 MHz. At least it stays nice and cool...

All times are GMT -7. The time now is 07:06 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.