Overclock.net - An Overclocking Community

Overclock.net - An Overclocking Community (https://www.overclock.net/forum/)
-   AMD Motherboards (https://www.overclock.net/forum/11-amd-motherboards/)
-   -   Asus & X399 The ROG Zenith Extreme: A Complaint & Bug Tracking Thread (https://www.overclock.net/forum/11-amd-motherboards/1642825-asus-x399-rog-zenith-extreme-complaint-bug-tracking-thread.html)

ENTERPRISE 11-26-2017 04:50 AM

Have Your Say & Create a BUG Report

 

Have you noticed any bugs or potential issues with the Zenith Rog Extreme ? If so please post a report in the below format to help Asus fix the issues
 

 

 

Bug Type: *Software or BIOS*

Applicable Software/Bios Version: *Let us know what version BIOS/Software you are using*

Windows Version & Build *Let us know what Windows version & build you are running*

Bug Description: *Describe the problem*

Steps to re-produce: *Detail how you can re-produce the bug or where to find it*

 

All Reports will then be added to the OP for Asus to look at

 

 

Current BUGS

(Click To Reveal)

 

 

Bug Report By Brain29 (Click to show)

Bug Type: BIOS

Applicable BIOS/Software Version: BIOS 0804 (Beta)

Windows Version/Build: N/A

BUG Description:
-uefi USB storage is not recognized (have 5 storage devices plugged in only 1 is seen *only the latest plugged in can be viewed)
-Uefi bios snapshot freezes bios (can not make snapshots for bug report)
-Uefi Asus fan controller does not set correct min fan power %
(Values are completely random per header all fans are the same type, settings yet each has a dramatically diffrent allowed min and Max power %)
-DIP5_1.04.92 fan expert , can not see extension fans if they are set to pwm on a extender same fan min % errors as in Uefi
-Uefi update sets external rgb to 100% power
-Uefi sets all board rgbs to off
-Aura (version from support page) no longer functional
-Livedash 1.01.07 not functional

Steps To Reproduce:N/A

 

Bug Report By Brain29 (Click to show)

Bug Type: BIOS

Applicable Software/Bios Version: All BIOS Version To DATE

Windows Version & Build N/A

Bug Description: Fans get stuck at 100% if waking from sleep mode

Steps to re-produce: If in Windows OS and system goes to sleep
upon wake all fans will be pinned at 100% power regardless of settings or temperature or header

 

Bug Report By gupsterg (Click to show)

Bug Type: BIOS

Applicable Software/Bios Version: BIOS (All Versions)

Windows Version & Build N/A

Bug Description: Cannot save BIOS Sscreenshot. The reason it occurs for me is when I use a USB stick with low free space. For example when USB stick has <~60MB I get freeze at UEFI snapshot, if it's ~100MB it's a non issue

Steps to re-produce: *Detail how you can re-produce the bug or where to find it*

 

Bug Report By bummerboy (BIOS 0901) (Click to show)

Bug Type: BIOS

Applicable Software/Bios Version: BIOS 0901

Windows Version & Build: N/A

Bug Description: Thanks @elmor for the bios I think it is more ram friendly, considering i am using hynixM

However fan controls is still funky. 3 hours into AIDA64, the chassis fans 1 and 2 spins DOWN to minimum
When i found out, i stop aida stress test, the fans doesnt return to normal state
just stayed that way

so i ran aida stress again. now cpu fan went down, temp went up.. and windows crashed

PS: on 901

To add: CPU temp stops updating itself after some load test
tdie is up to 64+C but cpu temp stays at 43C

 

Bug Report By Brain29 (BIOS 902) (Click to show)
back to bugs

@elmor

current corrupted uefi 902 with missing led firmware

 

Fixed BUGS

(Click To Reveal)

 

Bug Report By: The L33t (Click to show)
Bug Type: Not able to boot with more than 64GB on a 128GB kit.
Applicable Software/Bios Version: 0801
Windows Version & Build:
Windows 10
Bug Description: Not able to use my full 128GB kit (CMD128GX4M8A2666C15), this kit is mentioned as approved on the QVL for 128GB, but the kit tested on the QVL is v4.31 (Samsung) and mine is v5.39.. (Hynix)
Steps to re-produce: Just put anything more than 4 dimms, no post, just cycles.

Following ASUS's diagrams for recommended RAM order on the motherboard when adding 2/4/6/or 8 DRAMs

Comment By elmor: - Fixed as of 0902

 

Bug Report By: ReHWolution (Click to show)
Bug Report By: ReHWolution (Click to show)

Bug Type: Software
Applicable Software/Bios Version: AURA 1.05.27, tested on 0701, 0801 and 0804
Windows Version & Build: Windows 10 Pro 1709 x64 16299.64
Bug Description: When setting Rainbow Mode, AURA fails to set it correctly. At first it gives the Rainbow mode then after a couple of seconds switches to a mode similar to color cycle.
Steps to re-produce: Install AURA 1.05.27 and set Rainbow Mode or Default to have the same bug

 

Bug Type: Software
Applicable Software/Bios Version: LiveDash 1.01.17, tested on 0701, 0801 and 0804
Windows Version & Build: Windows 10 Pro 1709 x64 16299.64
Bug Description: Once installed, LiveDash breaks AURA, with red-only colours displayed by both RAM, Mainboard and RGB strips (ADD and not ADD). Also, LiveDash fails to set anything on the OLED display.
Steps to re-produce: Installing LiveDash 1.01.17 does it.

Comment By elmor: - The clash should be fixed with the latest versions. Not sure about rainbow mode problem, was working for me when I tried it with everything latest

 
Bug Report By: Chrono Detector (Click to show)
Bug Report By Chrono Detector (Click to show)

Bug Type: BIOS

Applicable Software/Bios Version: 0804 (BETA)

Windows Version & Build N/A

Bug Description: Just tried out the new BETA 0804 BIOS, it does not work with the DOCP RAM profile set at 3200Mhz while 0801 worked flawlessly. It fails to POST with my G.Skill Trident RAM, model F4-3200C16Q-32GTZR.

Steps to re-produce: N/A


Comment By elmor: - Should be fixed in 0902

Warning: Spoiler! (Click to show)
Bug Report By Davidov (Click to show)

Bug Type: BIOS

Applicable Software/Bios Version: BIOS 0804 (BETA)

Windows Version & Build N/A

Bug Description: My RAM will not run at rated default speed of 3200Mhz. Corsair Vengeance LPX CMKGX4M2B3200C16 (2x 16 GB) (Thaiphoon: Hynix M-die). It will only boot at 2933Mhz

Steps to re-produce: N/A
 

Comment By elmor: - Fixed in 0902

Bug Report By: Various (Quad Channel Dropping) (Click to show)
Bug Report By Various Users (Bios 0901) (Click to show)

Bug Type: BIOS

Applicable Software/Bios Version: BIOS 0901

Windows Version & Build N/A

Bug Description: When flashing the 0901 BIOS the sytem no longer runs Quad Channel RAM in Quad Channel and drops it down to Dual Channel if running RAM at 3600Mhz.

Steps to re-produce: Run Your system RAM above clock speeds of 3200Mhz, Generally speaking 3600Mhz drops to Dual Channel.
 

Comment by elmor:0902 does not have this issue

Bug Report By: DemonOfElru (Click to show)
Bug Report By DemonOfElru ( BIOS 0901) (Click to show)
Bug Type: BIOS
Applicable Software/Bios Version: 901
Windows Version & Build: Microsoft Windows 10 Pro, Version 10.0.16299 Build 16299
Bug Description: Only half of installed RAM is recognized/usable.

On 801:
  • 32GB installed, 32GB recognized in UEFI/Windows using default settings (2133MHz Auto/Default Profile)
  • 32GB installed, 32GB recognized/usable in UEFI/Windows using D.O.C.P (3200MHz)

On 901:
  • 32GB installed, 16GB recognized in UEFI/Windows using default settings (2133MHz Auto/Default Profile)
  • 32GB installed, 16GB recognized/usable in UEFI/Windows using D.O.C.P (3200MHz)


Memory kit is G.Skill TridentZ RGB F4-3200C16Q-32GTZR (On QVL)

Steps to re-produce:
  • Clear CMOS
  • Install 901
  • Observe usable RAM in Windows show: 32GB (15.9GB Usable). Observe Task Manager report 16GB (half) of memory is Hardware Reserved
  • Cold boot into UEFI. Observe RAM reported as 16GB
  • Clear CMOS
  • Install 801
  • Observe usable RAM in Windows show 32GB (31.9 Usable). Observe Task Manager report 125MB of memory is Hardware Reserved
  • Cold boot into UEFI. Observe RAM reported as 32GB

 

 

Comment by elmor:0902 does not have this issue

 

Un-reproducible BUGS

(Click To Reveal)

 

Bug Report By: mypickaxe (Click to show)
Bug Report By mypickaxe (Click to show)

Bug Type: BIOS

Applicable Software/Bios Version: 0804 (Beta)

Windows Version & Build N/A

Bug Description: Another issue I've run into involves the CMOS reset button. That works, but the OC profiles remain and become unusable. For instance, reset CMOS then attempt to load the profile saved previously and the UEFI hard locks. I have to power off and on again and save over the top of the profile to use it again.

Steps to re-produce: Have an OC Profile, Reset CMOS and try and reload said OC Profile.

 

Comment by elmor: Not seeing that here, might be board/CPU specific. CMOS memory is located on the CPU

Bug Report By: DemonOfElru (Click to show)
Bug Report By DemonOfElru ( BIOS 0901) (Click to show)

Bug Type: *Software or BIOS*

Applicable Software/Bios Version: BIOS 0901

Windows Version & Build N/A

Bug Description: Still can't switch PCIEX8/X4_4 to X8 mode in 0901.

CPU: 1950X
GFX: 2 x RX Vega 64 in PCIEX16_1 and PCIEX16_3
Memory: G.Skill 32GB (F4-3200C16Q-32GTZR)
Storage: 3xSamsung 960 PRO (1 x Under ROG cover, 2 x in DIMM.2 adapter)

It does the same thing it did on 801 and prior BIOSes. It resets the board/CPU a few times and reverts it back to X4

Steps to re-produce: Try to enable PCI-E 8X, It will reboot the system and revert to 4x speeds.

Bug Report By: Brain29 (Click to show)
@elmor

901 Issues *updated form 801 - re-flashed 4 times - cleared cmos each time

1) still no lights *present since updating to 804 then reverting back
2) fan issues still present (min fan power percentage is all over the place regardless of settings) *present since start
3) usb storage plugged into back usb ports no longer read after update *first noticed in 804 but now it seems to only apply to usb ports on the back
*If i plug them into the usb using the headers on the motherboard they are found
*windows has no issues seeing/reading storage drives

NEW to 901
4) Temperature reading is inaccurate
@4.1 I usually hit 70c v1.41 - 801 previous
with 901
The board never reports higher then 42c
(@.4.1 during testing at v1.45)

*water temp for both test would raise from 25c to about 30-35c
*external reading for 901 showed 70c ish temps (not accurately tested but far from 42c)


Image of bios settings and fan curves gonewild
*what I am trying to show is the min power% all fans are the same fan1 has a fan extender with 5 fans *I have removed the extender with the same results)

settings for 801 Warning: Spoiler! (Click to show)
[2017/12/02 16:04:55]
Ai Overclock Tuner [D.O.C.P.]
D.O.C.P. [D.O.C.P DDR4-3200 16-18-18-38-1.35V]
BCLK Frequency [100.0000]
Custom CPU Core Ratio [Auto]
> CPU Core Ratio [40.50]
Overclocking Enhancement [Auto]
Performance Bias [Auto]
Memory Frequency [DDR4-2933MHz]
Core Performance Boost [Auto]
SMT Mode [Auto]
Spread Spectrum [Auto]
EPU Power Saving Mode [Disabled]
TPU [Keep Current Settings]
CPU Core Voltage [Manual mode]
- CPU Core Voltage Override [1.32500]
CPU SOC Voltage [Auto]
DRAM AB Voltage [1.35000]
DRAM CD Voltage [1.35000]
1.8V PLL Voltage [Auto]
1.05V SB Voltage [Auto]
Target TDP [Auto]
TRC_EOM [Auto]
TRTP_EOM [Auto]
TRRS_S_EOM [Auto]
TRRS_L_EOM [Auto]
TWTR_EOM [Auto]
TWTR_L_EOM [Auto]
TWCL_EOM [Auto]
TWR_EOM [Auto]
TFAW_EOM [Auto]
TRCT_EOM [Auto]
TREFI_EOM [Auto]
TRDRD_DD_EOM [Auto]
TRDRD_SD_EOM [Auto]
TRDRD_SC_EOM [Auto]
TRDRD_SCDLR_EOM [Auto]
TRDRD_SCL_EOM [Auto]
TWRWR_DD_EOM [Auto]
TWRWR_SD_EOM [Auto]
TWRWR_SC_EOM [Auto]
TWRWR_SCDLR_EOM [Auto]
TWRWR_SCL_EOM [Auto]
TWRRD_EOM [Auto]
TRDWR_EOM [Auto]
TWRRD_SCDLR_EOM [Auto]
Mem Over Clock Fail Count [Auto]
DRAM CAS# Latency [16]
DRAM RAS# to CAS# Read Delay [18]
DRAM RAS# to CAS# Write Delay [18]
DRAM RAS# PRE Time [18]
DRAM RAS# ACT Time [38]
Trc [Auto]
TrrdS [Auto]
TrrdL [Auto]
Tfaw [Auto]
TwtrS [Auto]
TwtrL [Auto]
Twr [Auto]
Trcpage [Auto]
TrdrdScl [Auto]
TwrwrScl [Auto]
Trfc [Auto]
Trfc2 [Auto]
Trfc4 [Auto]
Tcwl [Auto]
Trtp [Auto]
Trdwr [Auto]
Twrrd [Auto]
TwrwrSc [Auto]
TwrwrSd [Auto]
TwrwrDd [Auto]
TrdrdSc [Auto]
TrdrdSd [Auto]
TrdrdDd [Auto]
Tcke [Auto]
ProcODT [Auto]
Cmd2T [Auto]
Gear Down Mode [Auto]
Power Down Enable [Auto]
RttNom [Auto]
RttWr [Auto]
RttPark [Auto]
MemAddrCmdSetup [Auto]
MemCsOdtSetup [Auto]
MemCkeSetup [Auto]
MemCadBusClkDrvStren [Auto]
MemCadBusAddrCmdDrvStren [Auto]
MemCadBusCsOdtDrvStren [Auto]
MemCadBusCkeDrvStren [Auto]
VTTDDR AB Voltage [Auto]
VTTDDR CD Voltage [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
DRAM CTRL REF Voltage on CHC [Auto]
DRAM CTRL REF Voltage on CHD [Auto]
VPP DRAM AB [Auto]
VPP DRAM CD [Auto]
1.8V Standby Voltage [Auto]
CPU 3.3v AUX [Auto]
2.5V SB Voltage [Auto]
DRAM R1 Tune [Auto]
DRAM R2 Tune [Auto]
DRAM R3 Tune [Auto]
DRAM R4 Tune [Auto]
Sense MI Skew [Auto]
Sense MI Offset [Auto]
Clock Amplitude [Auto]
PLL Tune R1 [Auto]
PLL Tune R2 [Auto]
PCIE Tune R1 [Auto]
PCIE Tune R2 [Auto]
PCIE Tune R3 [Auto]
Ln2 Tune [Auto]
PLL Reference Voltage [Auto]
PLL Reference Voltage 2 [Auto]
Short Reset [Auto]
CLDO VDDP voltage [Auto]
CPU Load-line Calibration [Auto]
CPU Current Capability [Auto]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Auto]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Auto]
CPU Power Thermal Control [120]
VDDSOC Load-line Calibration [Auto]
VDDSOC Current Capability [Auto]
VDDSOC Switching Frequency [Auto]
VDDSOC Phase Control [Auto]
VDDSOC Power Thermal Control [120]
DRAM Current Capability(CHA, CHB) [100%]
DRAM Current Capability(CHC, CHD) [100%]
DRAM Power Phase Control(CHA, CHB) [Extreme]
DRAM Power Phase Control(CHC, CHD) [Extreme]
DRAM Switching Frequency(CHA, CHB) [Auto]
DRAM Switching Frequency(CHC, CHD) [Auto]
DRAM VBoot Voltage AB [Auto]
DRAM VBoot Voltage CD [Auto]
Security Device Support [Enable]
Security Device Support [Enable]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
TPM2.0 UEFI Spec Version [TCG_2]
Physical Presence Spec Version [1.3]
TPM Device Selection [Discrete TPM]
Erase fTPM NV for factory reset [Enabled]
SATA Port Enable [Enabled]
PT Aggresive SATA Device Sleep Port 0 [Auto]
PT Aggresive SATA Device Sleep Port 1 [Auto]
PT XHCI GEN1 [Auto]
PT XHCI GEN2 [Auto]
PT USB Equalization4 [Auto]
PT USB Redriver [Auto]
U31G2_1 [Enabled]
USB3.1_2 [Enabled]
U31G1_9 [Enabled]
U31G1_10 [Enabled]
U31G1_11 [Enabled]
U31G1_12 [Enabled]
PT USB30 PORT4 [Enabled]
PT USB30 PORT5 [Enabled]
USB13 [Enabled]
USB14 [Enabled]
USB_3 [Enabled]
USB_5 [Enabled]
USB_6 [Enabled]
USB_4 [Enabled]
PT PCIE PORT 0 [Auto]
PT PCIE PORT 1 [Auto]
PT PCIE PORT 2 [Auto]
PT PCIE PORT 3 [Auto]
PT PCIE PORT 4 [Auto]
PT PCIE PORT 5 [Auto]
PT PCIE PORT 6 [Auto]
PT PCIE PORT 7 [Auto]
Onboard LED [Enabled]
SATA Port Enable [Enabled]
SATA Mode [AHCI]
SMART Self Test [Enabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
ErP Ready [Disabled]
Restore On AC Power Loss [Power Off]
Power On By PCI-E/PCI [Disabled]
Power On By RTC [Disabled]
HD Audio Controller [Enabled]
CPU PCIE Link Mode [Auto]
SB PCIE Link Mode [Auto]
PCIEX16_1 Bandwidth [X16 Mode]
PCIEX8_2 Bandwidth [X8 Mode]
PCIEX16_3 Bandwidth [X16 Mode]
PCIE_X8/X4_4 Bandwidth [X4 Mode]
Asmedia USB 3.1 Controller [Enabled]
USB Type C Power Switch for U31G2_1 [Auto]
USB Type C Power Switch for U31G2_EC1 [Auto]
When system is in working state [On]
When system is in sleep, hibernate or soft off states [On]
Intel LAN Controller [Enabled]
Intel LAN OPROM [Disabled]
Wi-Fi Controller [Enabled]
Bluetooth Controller [Enabled]
NX Mode [Enabled]
SVM Mode [Disabled]
Network Stack [Disabled]
Debug Port Table [Disabled]
Debug Port Table 2 [Disabled]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
Corsair Slider 3.0 1.00 [Auto]
U31G2_EC1 [Enabled]
U31G2_E2 [Enabled]
U31G2_1 [Enabled]
U31G1_1 [Enabled]
U31G1_2 [Enabled]
U31G1_3 [Enabled]
U31G1_4 [Enabled]
U31G1_5 [Enabled]
U31G1_6 [Enabled]
U31G1_7 [Enabled]
U31G1_8 [Enabled]
U31G1_9 [Enabled]
U31G1_10 [Enabled]
U31G1_11 [Enabled]
U31G1_12 [Enabled]
USB13 [Enabled]
USB14 [Enabled]
CPU Temperature [Monitor]
MotherBoard Temperature [Monitor]
VRM Temperature [Monitor]
PCH Temperature [Monitor]
T_Sensor1 Temperature [Monitor]
T_Sensor2 Temperature [Monitor]
DIMM.2 sensor1 Temperature [Monitor]
DIMM.2 sensor2 Temperature [Monitor]
EXT_Sensor1 Temperature [Monitor]
EXT_Sensor2 Temperature [Monitor]
EXT_Sensor3 Temperature [Monitor]
CPU Fan Speed [Ignore]
Chassis Fan 1 Speed [Monitor]
Chassis Fan 2 Speed [Monitor]
HAMP Fan Speed [Monitor]
W_PUMP+ Speed [Monitor]
CPU Optional Fan Speed [Monitor]
COV Fan Speed [Monitor]
Extension Fan 1 Speed [Monitor]
Extension Fan 2 Speed [Monitor]
Extension Fan 3 Speed [Monitor]
W FLOW1 Speed [Monitor]
Water In T Sensor Temperature [Monitor]
Water Out T Sensor Temperature [Monitor]
W FLOW2 Speed [Monitor]
WB In T Sensor Temperature [Monitor]
WB Out T Sensor Temperature [Monitor]
CPU Core Voltage [Monitor]
3.3V Voltage [Monitor]
5V Voltage [Monitor]
12V Voltage [Monitor]
CPU Q-Fan Control [Disabled]
W_PUMP+ Control [Disabled]
COV Fan Q-Fan Control [DC Mode]
COV Fan Smoothing Up/Down Time [0 sec]
COV Fan Upper Temperature [74]
COV Fan Max. Duty Cycle (%) [100]
COV Fan Middle Temperature [69]
COV Fan Middle. Duty Cycle (%) [63]
COV Fan Lower Temperature [55]
COV Fan Min. Duty Cycle (%) [48]
Allow Fan Stop [Disabled]
Chassis Fan 1 Q-Fan Control [PWM Mode]
Chassis Fan 1 Q-Fan Source [CPU]
Chassis Fan 1 Smoothing Up/Down Time [0 sec]
Chassis Fan 1 Speed Low Limit [Ignore]
Chassis Fan 1 Profile [Manual]
Chassis Fan 1 Upper Temperature [71]
Chassis Fan 1 Max. Duty Cycle (%) [100]
Chassis Fan 1 Middle Temperature [50]
Chassis Fan 1 Middle. Duty Cycle (%) [28]
Chassis Fan 1 Lower Temperature [14]
Chassis Fan 1 Min. Duty Cycle (%) [28]
Chassis Fan 2 Q-Fan Control [DC Mode]
Chassis Fan 2 Q-Fan Source [CPU]
Chassis Fan 2 Smoothing Up/Down Time [0 sec]
Chassis Fan 2 Speed Low Limit [200 RPM]
Chassis Fan 2 Profile [Manual]
Chassis Fan 2 Upper Temperature [75]
Chassis Fan 2 Max. Duty Cycle (%) [100]
Chassis Fan 2 Middle Temperature [70]
Chassis Fan 2 Middle. Duty Cycle (%) [60]
Chassis Fan 2 Lower Temperature [65]
Chassis Fan 2 Min. Duty Cycle (%) [60]
Allow Fan Stop [Enabled]
HAMP Fan Q-Fan Control [DC Mode]
HAMP Fan Source [CPU]
HAMP Fan Smoothing Up/Down Time [0 sec]
HAMP Fan Speed Low Limit [200 RPM]
HAMP Fan Profile [Manual]
HAMP Fan Upper Temperature [60]
HAMP Fan Max. Duty Cycle (%) [100]
Chassis Fan 3 Middle Temperature [55]
Chassis Fan 3 Middle. Duty Cycle (%) [60]
HAMP Fan Lower Temperature [50]
HAMP Fan Min. Duty Cycle (%) [60]
Allow Fan Stop [Enabled]
Extension Fan 1 Q-Fan Control [PWM Mode]
Extension Fan 1 Q-Fan Source [T_Sensor2]
Extension Fan 1 Speed Low Limit [200 RPM]
Extension Fan 1 Profile [Manual]
Extension Fan 1 Upper Temperature [59]
Extension Fan 1 Max. Duty Cycle (%) [100]
Extension Fan 1 Middle Temperature [50]
Extension Fan 1 Middle. Duty Cycle (%) [38]
Extension Fan 1 Lower Temperature [20]
Extension Fan 1 Min. Duty Cycle (%) [38]
Extension Fan 2 Q-Fan Control [DC Mode]
Extension Fan 2 Q-Fan Source [CPU]
Extension Fan 2 Speed Low Limit [200 RPM]
Extension Fan 2 Profile [Manual]
Extension Fan 2 Upper Temperature [70]
Extension Fan 2 Max. Duty Cycle (%) [100]
Extension Fan 2 Middle Temperature [54]
Extension Fan 2 Middle. Duty Cycle (%) [30]
Extension Fan 2 Lower Temperature [27]
Extension Fan 2 Min. Duty Cycle (%) [30]
Allow Fan Stop [Disabled]
Extension Fan 3 Q-Fan Control [DC Mode]
Extension Fan 3 Q-Fan Source [CPU]
Extension Fan 3 Speed Low Limit [200 RPM]
Extension Fan 3 Profile [Manual]
Extension Fan 3 Upper Temperature [67]
Extension Fan 3 Max. Duty Cycle (%) [100]
Extension Fan 3 Middle Temperature [56]
Extension Fan 3 Middle. Duty Cycle (%) [30]
Extension Fan 3 Lower Temperature [37]
Extension Fan 3 Min. Duty Cycle (%) [30]
Allow Fan Stop [Disabled]
OnChip SATA Channel [Enabled]
OnChip SATA Type [AHCI]
U31G1_1 [Enabled]
U31G1_2 [Enabled]
U31G1_3 [Enabled]
U31G1_4 [Enabled]
U31G1_5 [Enabled]
U31G1_6 [Enabled]
U31G1_7 [Enabled]
U31G1_8 [Enabled]
IR Config [Disabled]
SD Mode [Disabled]
SdForce18 Enable [Disabled]
SD Mode configuration [AMDA]
Uart 0 Enable [Disabled]
Uart 1 Enable [Disabled]
I2C 0 Enable [Disabled]
I2C 1 Enable [Disabled]
I2C 2 Enable [Disabled]
I2C 3 Enable [Disabled]
Restore On AC Power Loss [Power Off]
GPIO Devices Support [Disabled]
ESATA Port On Port 0 [Disabled]
ESATA Port On Port 1 [Disabled]
ESATA Port On Port 2 [Disabled]
ESATA Port On Port 3 [Disabled]
ESATA Port On Port 4 [Disabled]
ESATA Port On Port 5 [Disabled]
ESATA Port On Port 6 [Disabled]
ESATA Port On Port 7 [Disabled]
SATA Power On Port 0 [Enabled]
SATA Power On Port 1 [Enabled]
SATA Power On Port 2 [Enabled]
SATA Power On Port 3 [Enabled]
SATA Power On Port 4 [Enabled]
SATA Power On Port 5 [Enabled]
SATA Power On Port 6 [Enabled]
SATA Power On Port 7 [Enabled]
SATA Port 0 MODE [Auto]
SATA Port 1 MODE [Auto]
SATA Port 2 MODE [Auto]
SATA Port 3 MODE [Auto]
SATA Port 4 MODE [Auto]
SATA Port 5 MODE [Auto]
SATA Port 6 MODE [Auto]
SATA Port 7 MODE [Auto]
SATA Hot-Removabel Support [Disabled]
SATA 6 AHCI Support [Disabled]
Int. Clk Differential Spread [Disabled]
SATA MAXGEN2 CAP OPTION [Disabled]
SATA CLK Mode Option [INT 100MHz]
Aggressive Link PM Capability [Enabled]
Port Multiplier Capability [Enabled]
SATA Ports Auto Clock Control [Enabled]
SATA Partial State Capability [Enabled]
SATA FIS Based Switching [Enabled]
SATA Command Completion Coalescing Support [Disabled]
SATA Slumber State Capability [Enabled]
SATA MSI Capability Support [Disabled]
SATA Target Support 8 Devices [Disabled]
Generic Mode [Disabled]
SATA AHCI Enclosure [Disabled]
SATA SGPIO 0 [Disabled]
SATA SGPIO 1 [Disabled]
SATA PHY PLL [Disabled]
AC/DC Change Message Delivery [Disabled]
TimerTick Tracking [Enabled]
Clock Interrupt Tag [Enabled]
EHCI Traffic Handling [Disabled]
Fusion Message C Multi-Core [Disabled]
Fusion Message C State [Disabled]
SPI Auto Mode [Disabled]
SPI Read Mode [Default]
SPI 100MHz Support [Enabled]
SPI Normal Speed [33MHz]
SPI Fast Read Speed [Default]
SPI Burst Write [Disabled]
I2C 0 D3 Support [Enabled]
I2C 1 D3 Support [Enabled]
I2C 2 D3 Support [Enabled]
I2C 3 D3 Support [Enabled]
UART 0 D3 Support [Enabled]
UART 1 D3 Support [Enabled]
SATA D3 Support [Enabled]
EHCI D3 Support [Enabled]
XHCI D3 Support [Enabled]
SD D3 Support [Enabled]
S0I3 [Disabled]
Chipset Power Saving Features [Enabled]
SB Clock Spread Spectrum [Enabled]
SB Clock Spread Spectrum Option [-0.375%]
HPET In SB [Enabled]
MsiDis in HPET [Disabled]
_OSC For PCI0 [Enabled]
USB Phy Power Down [Disabled]
PCIB_CLK_Stop Override [0]
USB MSI Option [Disabled]
LPC MSI Option [Disabled]
PCIBridge MSI Option [Disabled]
AB MSI Option [Disabled]
SB C1E Support [Disabled]
SB Hardware Reduced Support [Disabled]
GPP Serial Debug Bus Enable [Disabled]
Fast Boot [Enabled]
Next Boot after AC Power Loss [Normal Boot]
Boot Logo Display [Auto]
POST Delay Time [3 sec]
Boot up NumLock State [Enabled]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Enabled]
Interrupt 19 Capture [Disabled]
Setup Mode [Advanced Mode]
Launch CSM [Enabled]
Boot Device Control [UEFI and Legacy OPROM]
Boot from Network Devices [Legacy only]
Boot from Storage Devices [Legacy only]
Boot from PCI-E Expansion Devices [Legacy only]
OS Type [Other OS]
Setup Animator [Disabled]
Load from Profile [1]
Profile Name [OC_CPU_MEM_FAN]
Save to Profile [2]
CPU Core Voltage [Auto]
VDDSOC Voltage [Auto]
1.8V PLL Voltage [Auto]
BCLK Frequency [Auto]
CPU Ratio [Auto]
Bus Interface [PCIEX16_1]

settings for 901 (i currently have the cpu overclocked to 41 no issues) Warning: Spoiler! (Click to show)
[2017/12/13 20:36:10]
Ai Overclock Tuner [D.O.C.P.]
D.O.C.P. [D.O.C.P DDR4-3200 16-18-18-38-1.35V]
BCLK Frequency [100.0000]
Custom CPU Core Ratio [Auto]
> CPU Core Ratio [Auto]
Overclocking Enhancement [Auto]
Performance Bias [Auto]
Memory Frequency [DDR4-3200MHz]
Core Performance Boost [Auto]
SMT Mode [Auto]
Spread Spectrum [Auto]
EPU Power Saving Mode [Disabled]
TPU [Keep Current Settings]
CPU Core Voltage [Auto]
CPU SOC Voltage [Auto]
DRAM AB Voltage [1.35000]
DRAM CD Voltage [1.35000]
1.8V PLL Voltage [Auto]
1.05V SB Voltage [Auto]
Target TDP [Auto]
TRC_EOM [Auto]
TRTP_EOM [Auto]
TRRS_S_EOM [Auto]
TRRS_L_EOM [Auto]
TWTR_EOM [Auto]
TWTR_L_EOM [Auto]
TWCL_EOM [Auto]
TWR_EOM [Auto]
TFAW_EOM [Auto]
TRCT_EOM [Auto]
TREFI_EOM [Auto]
TRDRD_DD_EOM [Auto]
TRDRD_SD_EOM [Auto]
TRDRD_SC_EOM [Auto]
TRDRD_SCDLR_EOM [Auto]
TRDRD_SCL_EOM [Auto]
TWRWR_DD_EOM [Auto]
TWRWR_SD_EOM [Auto]
TWRWR_SC_EOM [Auto]
TWRWR_SCDLR_EOM [Auto]
TWRWR_SCL_EOM [Auto]
TWRRD_EOM [Auto]
TRDWR_EOM [Auto]
TWRRD_SCDLR_EOM [Auto]
Mem Over Clock Fail Count [Auto]
DRAM CAS# Latency [16]
DRAM RAS# to CAS# Read Delay [18]
DRAM RAS# to CAS# Write Delay [18]
DRAM RAS# PRE Time [18]
DRAM RAS# ACT Time [38]
Trc [Auto]
TrrdS [Auto]
TrrdL [Auto]
Tfaw [Auto]
TwtrS [Auto]
TwtrL [Auto]
Twr [Auto]
Trcpage [Auto]
TrdrdScl [Auto]
TwrwrScl [Auto]
Trfc [Auto]
Trfc2 [Auto]
Trfc4 [Auto]
Tcwl [Auto]
Trtp [Auto]
Trdwr [Auto]
Twrrd [Auto]
TwrwrSc [Auto]
TwrwrSd [Auto]
TwrwrDd [Auto]
TrdrdSc [Auto]
TrdrdSd [Auto]
TrdrdDd [Auto]
Tcke [Auto]
ProcODT [Auto]
Cmd2T [Auto]
Gear Down Mode [Auto]
Power Down Enable [Auto]
RttNom [Auto]
RttWr [Auto]
RttPark [Auto]
MemAddrCmdSetup [Auto]
MemCsOdtSetup [Auto]
MemCkeSetup [Auto]
MemCadBusClkDrvStren [Auto]
MemCadBusAddrCmdDrvStren [Auto]
MemCadBusCsOdtDrvStren [Auto]
MemCadBusCkeDrvStren [Auto]
VTTDDR AB Voltage [Auto]
VTTDDR CD Voltage [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
DRAM CTRL REF Voltage on CHC [Auto]
DRAM CTRL REF Voltage on CHD [Auto]
VPP DRAM AB [Auto]
VPP DRAM CD [Auto]
1.8V Standby Voltage [Auto]
CPU 3.3v AUX [Auto]
2.5V SB Voltage [Auto]
DRAM R1 Tune [Auto]
DRAM R2 Tune [Auto]
DRAM R3 Tune [Auto]
DRAM R4 Tune [Auto]
Sense MI Skew [Auto]
Sense MI Offset [Auto]
Clock Amplitude [Auto]
PLL Tune R1 [Auto]
PLL Tune R2 [Auto]
PCIE Tune R1 [Auto]
PCIE Tune R2 [Auto]
PCIE Tune R3 [Auto]
Ln2 Tune [Auto]
PLL Reference Voltage [Auto]
PLL Reference Voltage 2 [Auto]
Short Reset [Auto]
CLDO VDDP voltage [Auto]
CPU Load-line Calibration [Auto]
CPU Current Capability [Auto]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Auto]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Auto]
CPU Power Thermal Control [120]
VDDSOC Load-line Calibration [Auto]
VDDSOC Current Capability [Auto]
VDDSOC Switching Frequency [Auto]
VDDSOC Phase Control [Auto]
VDDSOC Power Thermal Control [120]
DRAM Current Capability(CHA, CHB) [100%]
DRAM Current Capability(CHC, CHD) [100%]
DRAM Power Phase Control(CHA, CHB) [Extreme]
DRAM Power Phase Control(CHC, CHD) [Extreme]
DRAM Switching Frequency(CHA, CHB) [Auto]
DRAM Switching Frequency(CHC, CHD) [Auto]
DRAM VBoot Voltage AB [Auto]
DRAM VBoot Voltage CD [Auto]
Security Device Support [Enable]
Security Device Support [Enable]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
TPM2.0 UEFI Spec Version [TCG_2]
Physical Presence Spec Version [1.3]
TPM Device Selection [Discrete TPM]
Erase fTPM NV for factory reset [Enabled]
SATA Port Enable [Enabled]
PT Aggresive SATA Device Sleep Port 0 [Auto]
PT Aggresive SATA Device Sleep Port 1 [Auto]
PT XHCI GEN1 [Auto]
PT XHCI GEN2 [Auto]
PT USB Equalization4 [Auto]
PT USB Redriver [Auto]
U31G2_1 [Enabled]
USB3.1_2 [Enabled]
U31G1_9 [Enabled]
U31G1_10 [Enabled]
U31G1_11 [Enabled]
U31G1_12 [Enabled]
PT USB30 PORT4 [Enabled]
PT USB30 PORT5 [Enabled]
USB13 [Enabled]
USB14 [Enabled]
USB_3 [Enabled]
USB_5 [Enabled]
USB_6 [Enabled]
USB_4 [Enabled]
PT PCIE PORT 0 [Auto]
PT PCIE PORT 1 [Auto]
PT PCIE PORT 2 [Auto]
PT PCIE PORT 3 [Auto]
PT PCIE PORT 4 [Auto]
PT PCIE PORT 5 [Auto]
PT PCIE PORT 6 [Auto]
PT PCIE PORT 7 [Auto]
Onboard LED [Disabled]
SATA Port Enable [Enabled]
SATA Mode [AHCI]
SMART Self Test [Enabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
ErP Ready [Disabled]
Restore On AC Power Loss [Power Off]
Power On By PCI-E/PCI [Disabled]
Power On By RTC [Disabled]
HD Audio Controller [Enabled]
CPU PCIE Link Mode [Auto]
SB PCIE Link Mode [Auto]
PCIEX16_1 Bandwidth [X16 Mode]
PCIEX8_2 Bandwidth [X8 Mode]
PCIEX16_3 Bandwidth [X16 Mode]
PCIE_X8/X4_4 Bandwidth [X4 Mode]
Asmedia USB 3.1 Controller [Enabled]
USB Type C Power Switch for U31G2_1 [Auto]
USB Type C Power Switch for U31G2_EC1 [Auto]
When system is in working state [On]
When system is in sleep, hibernate or soft off states [On]
Intel LAN Controller [Enabled]
Intel LAN OPROM [Disabled]
Wi-Fi Controller [Enabled]
Bluetooth Controller [Enabled]
NX Mode [Enabled]
SVM Mode [Disabled]
Network Stack [Disabled]
Debug Port Table [Disabled]
Debug Port Table 2 [Disabled]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
SanDisk [Auto]
Corsair Slider 3.0 1.00 [Auto]
U31G2_EC1 [Enabled]
U31G2_E2 [Enabled]
U31G2_1 [Enabled]
U31G1_1 [Enabled]
U31G1_2 [Enabled]
U31G1_3 [Enabled]
U31G1_4 [Enabled]
U31G1_5 [Enabled]
U31G1_6 [Enabled]
U31G1_7 [Enabled]
U31G1_8 [Enabled]
U31G1_9 [Enabled]
U31G1_10 [Enabled]
U31G1_11 [Enabled]
U31G1_12 [Enabled]
USB13 [Enabled]
USB14 [Enabled]
Hide Asus Logo [Disabled]
CPU Temperature [Monitor]
MotherBoard Temperature [Monitor]
VRM Temperature [Monitor]
PCH Temperature [Monitor]
T_Sensor1 Temperature [Monitor]
T_Sensor2 Temperature [Monitor]
DIMM.2 sensor1 Temperature [Monitor]
DIMM.2 sensor2 Temperature [Monitor]
EXT_Sensor1 Temperature [Monitor]
EXT_Sensor2 Temperature [Monitor]
EXT_Sensor3 Temperature [Monitor]
CPU Fan Speed [Ignore]
Chassis Fan 1 Speed [Monitor]
Chassis Fan 2 Speed [Monitor]
HAMP Fan Speed [Monitor]
W_PUMP+ Speed [Monitor]
CPU Optional Fan Speed [Ignore]
COV Fan Speed [Monitor]
Extension Fan 1 Speed [Monitor]
Extension Fan 2 Speed [Monitor]
Extension Fan 3 Speed [Monitor]
W FLOW1 Speed [Monitor]
Water In T Sensor Temperature [Monitor]
Water Out T Sensor Temperature [Monitor]
W FLOW2 Speed [Monitor]
WB In T Sensor Temperature [Monitor]
WB Out T Sensor Temperature [Monitor]
CPU Core Voltage [Monitor]
3.3V Voltage [Monitor]
5V Voltage [Monitor]
12V Voltage [Monitor]
CPU Q-Fan Control [DC Mode]
CPU Fan Smoothing Up/Down Time [0 sec]
CPU Fan Speed Lower Limit [200 RPM]
CPU Fan Profile [Manual]
CPU Upper Temperature [60]
CPU Fan Max. Duty Cycle (%) [100]
CPU Middle Temperature [45]
CPU Fan Middle. Duty Cycle (%) [60]
CPU Lower Temperature [40]
CPU Fan Min. Duty Cycle (%) [60]
W_PUMP+ Control [Disabled]
COV Fan Q-Fan Control [DC Mode]
COV Fan Smoothing Up/Down Time [0 sec]
COV Fan Upper Temperature [95]
COV Fan Max. Duty Cycle (%) [100]
COV Fan Middle Temperature [90]
COV Fan Middle. Duty Cycle (%) [100]
COV Fan Lower Temperature [70]
COV Fan Min. Duty Cycle (%) [60]
Allow Fan Stop [Enabled]
Chassis Fan 1 Q-Fan Control [PWM Mode]
Chassis Fan 1 Q-Fan Source [T_Sensor2]
Chassis Fan 1 Smoothing Up/Down Time [0 sec]
Chassis Fan 1 Speed Low Limit [200 RPM]
Chassis Fan 1 Profile [Standard]
Chassis Fan 2 Q-Fan Control [DC Mode]
Chassis Fan 2 Q-Fan Source [T_Sensor2]
Chassis Fan 2 Smoothing Up/Down Time [0 sec]
Chassis Fan 2 Speed Low Limit [200 RPM]
Chassis Fan 2 Profile [Standard]
HAMP Fan Q-Fan Control [DC Mode]
HAMP Fan Source [CPU]
HAMP Fan Smoothing Up/Down Time [0 sec]
HAMP Fan Speed Low Limit [200 RPM]
HAMP Fan Profile [Standard]
Extension Fan 1 Q-Fan Control [PWM Mode]
Extension Fan 1 Q-Fan Source [T_Sensor2]
Extension Fan 1 Speed Low Limit [200 RPM]
Extension Fan 1 Profile [Manual]
Extension Fan 1 Upper Temperature [60]
Extension Fan 1 Max. Duty Cycle (%) [100]
Extension Fan 1 Middle Temperature [25]
Extension Fan 1 Middle. Duty Cycle (%) [38]
Extension Fan 1 Lower Temperature [10]
Extension Fan 1 Min. Duty Cycle (%) [38]
Extension Fan 2 Q-Fan Control [DC Mode]
Extension Fan 2 Q-Fan Source [T_Sensor2]
Extension Fan 2 Speed Low Limit [200 RPM]
Extension Fan 2 Profile [Manual]
Extension Fan 2 Upper Temperature [60]
Extension Fan 2 Max. Duty Cycle (%) [100]
Extension Fan 2 Middle Temperature [45]
Extension Fan 2 Middle. Duty Cycle (%) [60]
Extension Fan 2 Lower Temperature [40]
Extension Fan 2 Min. Duty Cycle (%) [5]
Allow Fan Stop [Disabled]
Extension Fan 3 Q-Fan Control [DC Mode]
Extension Fan 3 Q-Fan Source [T_Sensor2]
Extension Fan 3 Speed Low Limit [200 RPM]
Extension Fan 3 Profile [Manual]
Extension Fan 3 Upper Temperature [60]
Extension Fan 3 Max. Duty Cycle (%) [100]
Extension Fan 3 Middle Temperature [45]
Extension Fan 3 Middle. Duty Cycle (%) [60]
Extension Fan 3 Lower Temperature [40]
Extension Fan 3 Min. Duty Cycle (%) [37]
Allow Fan Stop [Disabled]
OnChip SATA Channel [Enabled]
OnChip SATA Type [AHCI]
U31G1_1 [Enabled]
U31G1_2 [Enabled]
U31G1_3 [Enabled]
U31G1_4 [Enabled]
U31G1_5 [Enabled]
U31G1_6 [Enabled]
U31G1_7 [Enabled]
U31G1_8 [Enabled]
IR Config [Disabled]
SD Mode [Disabled]
SdForce18 Enable [Disabled]
SD Mode configuration [AMDA]
Uart 0 Enable [Disabled]
Uart 1 Enable [Disabled]
I2C 0 Enable [Disabled]
I2C 1 Enable [Disabled]
I2C 2 Enable [Disabled]
I2C 3 Enable [Disabled]
Restore On AC Power Loss [Power Off]
GPIO Devices Support [Disabled]
ESATA Port On Port 0 [Disabled]
ESATA Port On Port 1 [Disabled]
ESATA Port On Port 2 [Disabled]
ESATA Port On Port 3 [Disabled]
ESATA Port On Port 4 [Disabled]
ESATA Port On Port 5 [Disabled]
ESATA Port On Port 6 [Disabled]
ESATA Port On Port 7 [Disabled]
SATA Power On Port 0 [Enabled]
SATA Power On Port 1 [Enabled]
SATA Power On Port 2 [Enabled]
SATA Power On Port 3 [Enabled]
SATA Power On Port 4 [Enabled]
SATA Power On Port 5 [Enabled]
SATA Power On Port 6 [Enabled]
SATA Power On Port 7 [Enabled]
SATA Port 0 MODE [Auto]
SATA Port 1 MODE [Auto]
SATA Port 2 MODE [Auto]
SATA Port 3 MODE [Auto]
SATA Port 4 MODE [Auto]
SATA Port 5 MODE [Auto]
SATA Port 6 MODE [Auto]
SATA Port 7 MODE [Auto]
SATA Hot-Removabel Support [Disabled]
SATA 6 AHCI Support [Disabled]
Int. Clk Differential Spread [Disabled]
SATA MAXGEN2 CAP OPTION [Disabled]
SATA CLK Mode Option [INT 100MHz]
Aggressive Link PM Capability [Enabled]
Port Multiplier Capability [Enabled]
SATA Ports Auto Clock Control [Enabled]
SATA Partial State Capability [Enabled]
SATA FIS Based Switching [Enabled]
SATA Command Completion Coalescing Support [Disabled]
SATA Slumber State Capability [Enabled]
SATA MSI Capability Support [Disabled]
SATA Target Support 8 Devices [Disabled]
Generic Mode [Disabled]
SATA AHCI Enclosure [Disabled]
SATA SGPIO 0 [Disabled]
SATA SGPIO 1 [Disabled]
SATA PHY PLL [Disabled]
AC/DC Change Message Delivery [Disabled]
TimerTick Tracking [Enabled]
Clock Interrupt Tag [Enabled]
EHCI Traffic Handling [Disabled]
Fusion Message C Multi-Core [Disabled]
Fusion Message C State [Disabled]
SPI Auto Mode [Disabled]
SPI Read Mode [Default]
SPI 100MHz Support [Enabled]
SPI Normal Speed [33MHz]
SPI Fast Read Speed [Default]
SPI Burst Write [Disabled]
I2C 0 D3 Support [Enabled]
I2C 1 D3 Support [Enabled]
I2C 2 D3 Support [Enabled]
I2C 3 D3 Support [Enabled]
UART 0 D3 Support [Enabled]
UART 1 D3 Support [Enabled]
SATA D3 Support [Enabled]
EHCI D3 Support [Enabled]
XHCI D3 Support [Enabled]
SD D3 Support [Enabled]
S0I3 [Disabled]
Chipset Power Saving Features [Enabled]
SB Clock Spread Spectrum [Enabled]
SB Clock Spread Spectrum Option [-0.375%]
HPET In SB [Enabled]
MsiDis in HPET [Disabled]
_OSC For PCI0 [Enabled]
USB Phy Power Down [Disabled]
PCIB_CLK_Stop Override [0]
USB MSI Option [Disabled]
LPC MSI Option [Disabled]
PCIBridge MSI Option [Disabled]
AB MSI Option [Disabled]
SB C1E Support [Disabled]
SB Hardware Reduced Support [Disabled]
GPP Serial Debug Bus Enable [Disabled]
Fast Boot [Enabled]
Next Boot after AC Power Loss [Normal Boot]
Boot Logo Display [Auto]
POST Delay Time [3 sec]
Boot up NumLock State [Enabled]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Enabled]
Interrupt 19 Capture [Disabled]
Setup Mode [Advanced Mode]
Launch CSM [Enabled]
Boot Device Control [UEFI and Legacy OPROM]
Boot from Network Devices [Legacy only]
Boot from Storage Devices [Legacy only]
Boot from PCI-E Expansion Devices [Legacy only]
OS Type [Other OS]
SATA Boot Only [Disabled]
USB Boot [Enabled]
Watchdog Support [Disabled]
ASUS RMT Tool Support [Disabled]
Setup Animator [Disabled]
Load from Profile [1]
Profile Name [Fans_set]
Save to Profile [1]
CPU Core Voltage [Auto]
VDDSOC Voltage [Auto]
1.8V PLL Voltage [Auto]
BCLK Frequency [Auto]
CPU Ratio [Auto]
Bus Interface [PCIEX16_1]




computer info dump Warning: Spoiler! (Click to show)HWiNFO64 Version 5.60-3280

 

Comments By elmor: - Looks fine to me, I don't think we changed anything in this regard between builds. Would need more info on which sensor exactly is wrong and how it compares to other available readings.

 

Downloads

 

 

Latest Beta BIOS: (0902) Reverted To Prior AGESA 1.0.0.3

Changes:

- 1DPC SR Hynix M-die issue fixed (not related to AGESA version)
- No DRAM Channel dropping (AGESA related)

 

Beta Test BIOS: (0019) Based on 0901

Changes:

Anyone with memory channels dropping, try this test BIOS. Based on 0901.

 

Beta BIOS: 0901 (New Agesa Code)

Changes:

- AGESA 1.0.0.4
- Fan fixes from 0012
- UEFI RAID driver updated (and hopefully back on track)

 

Beta BIOS: 0012 (Based on 0804 Final)

Changes:

*A few more fan tuning and control issues should be patched in this test BIOS. PWM/DC seems to detect properly. I still get bad min fan speed detected after running Q-Fan Tuning, but way more seldom (2 times out of 50). As posted by elmor at Asus.

 

 

Latest Stable BIOS: 0804(Click to Download)

Changes:

* AGESA 1.0.0.3
* Hynix 2DPC patch (POST issues with all slots populated)
* Fan control fixes, including EXT_FAN card
* PCIEX8/X4_4 lane switching tested and works fine @capitaltpt, however I haven't verified the issue on older BIOS

 

Official Change Log

 

1. Improve memory compatibility
2. Fix CPU abnormal temperature after clearing CMOS
3. Fix CPU/CHA Fan EQ mode issue under AI-suite 3
4. Fix PWM and DC mode display error for EXT_Fan under Fan Xpert

 

NOTICE: If you are upgrading from beta BIOS 0801 and have a SATA/NVMe RAID configuration, backup your data and remove the array before updating to this build.
If you are updating from any other BIOS version (e.g. 0701) or do not have any drives configured in RAID, you may update normally.

 

Lighting Control/Aura Software 1.05.28

Download Here

 

OLED FW 201 Update (Run the "Aura IC FW Update.exe" file)

Download Here

 

AISuite Beta (Works with Spectre & Meltdown Updates)

Download Here or Here

 

 

My Experience

 

 

 

*Disclaimer* This is my opinion as a concerned customer, not that of Overclock.net.

 

@elmor

@[email protected]

 

 

Hello all,

 

So I wanted to document an ever growing issue with Asus and the X399 Flagship motherboard, the Zenith Extreme. First however, here is a small story that many here will likely relate to.

 

When I heard of the Threadripper platform, I was super excited to a see a well priced consumer CPU (compared to other products) that featured a large core and thread count. Needless to say I started my product research journey to choose a suitable motherboard to pair up with the Threadripper CPU. There were a few to choose from, all with a fairly good feature set, however I had owned Asus ROG boards in the passed and had been impressed with the support given. With that in mind I went searching for the Asus champion motherboard. ALAS ! I found the Zenith Extreme. Looking at it's feature set it was a no brainer....but it was an EXPENSIVE product to say the least at approx £500, but if I am spending approx £1000 on a CPU then why would I skimp on the motherboard right ?

 

I get the motherboard home, I build the PC. Loving the build quality and feature set of the Zenith Extreme ! Super excited to get everything running especially with our ASUS Rog Zenith Extreme Zenith Overclocking/Support Thread.

 

Unfortunately a few weeks later, the excitment started to falter and my disappointment and buyers remorse grew like many others here on OCN and likely around the world.  So with out further delay lets point out some of the issues we as Zenith Extreme owners are facing that Asus REALLY need to fix.

 

The Support Page

 

As per the support page here:https://www.asus.com/uk/Motherboards/ROG-ZENITH-EXTREME/HelpDesk_Download/

 

Where is half of the software ? When you buy any product, let alone a very expensive flagship product such as the Zenith Extreme, you would expect all the latest up to date software,Firmware and BIOS''s to be present right ? WRONG.

 

What baffles me is that the Zenith Extreme is a feature packed motherboard, yet some of the software, or at least the latest software versions to take advantage of these features are not present. Even more so, the latest BIOS releases are not event present.

 

This is fairly shocking. What is more baffling is that the latest BIOS releases as well as the patched AI Suite, Aura and Livedash software have made there way to disorganized threads on the ASUS ROG Forums. So why have they not found there way to the centralized support page that EVERYONE will visit. Nobody wants to sift through a forum to find the latest software for a product they have purchased. That is simply poor customer relations and support, no excuse for it.

 

Asus, Why ?

 

 

The BIOS

 

Where is the BIOS that will hopefully remedy some of the memory issues we have been facing ? The new TR AGESA 1.0.0.4 Code from AMD has been out for a while now and other motherboard manufacturers have already released their BIOS's with the lates AGESA code, and they are final as well, not even BETA.

 

So I have to ask, why is it taking so long for Asus to release the new BIOS with the latest AGESA Code that would fix or at least help your consumers with their Memory and other BIOS woes that seem to plague this platform ?

 

We have been given test BIOS file here on the forums and luckily a modified BIOS by Stilt that have helped. The issue is, why are we using these test BIOS files and custom modified BIOS's when we could have a new BIOS on new and very important AGESA Code ?

 

Asus Why ?

 

 

The AI Suite & Utilities

 

The AI Suite is the hub when it comes to taking advantage of your motherboards capbilities within Windows. So we consider it fairly important right ? Unfortunately we still do not seem to see much forward facing progress on this piece of software and its tendencies for bugs. I cannot recall all the bugs I have seen others mention, however one obvious bug is the FAN CONTROL. On many frequent occasions trying to set a fan speed via AI Suite will be ignored, leading you to restart your PC and trying again further to this even if you have performed the fan calibration...the software seems to forget and at times asks you to re-perform calibration...even though NOTHING has changed in the system at all.

 

Why has seemingly little to nil progress been made on this software, as I say it is the HUB of the Asus utilities.

 

Asus Why ?

 

Further to this I see complaints about the Aura software frequently with its inability compatibilty wise with LED Strips etc, while I do not use this software it comes up often with complaints from users. Yet we still do not see too many updates. I know there have been updates but again the complaints are the same.

 

Again, as mentioned above....these utilities are hard to find, having to sift through the ROG forum rather than going to the main support page is just ridiculous.

 

 

Asus, you have responsibilities !

 

Like with any product purchase, you expect that the support given for the product will be easy to find and up to date. Even though it should be the case across the board from entry level to flagship level, Consumers have a higher expectation of support for flagship products. That is a no brainer when you are putting down hundred of pounds/dollars on a product, I mean why wouldn't you expect the best of support !

 

What I dont understand is that from my experience with ASUS ROG Products is that the support has been well maintained, updates were frequent, this lead to a happy customer. However admittedly these were Intel platforms in the past. Now I have moved to a Flagship AMD platform product, my experience is totally opposite and hugely disappointing.

 

In reality there should be the same level of excellent support across any product, whether it be Intel or AMD based. However this is not the case here.

 

Asus is there a reason for this disparity ?

 

 

 

Conclusion.

 

I would like to think that Asus will step up and get to working on the issues stated in this thread and the various threads across the internet. Admittedly the experience with this Asus ROG product has REALLY put me off Asus motherboards which is a huge shame. The features are there, the build quality is there....but the support isnt.

 

We all know a product is only as good as its support !

 

I am hoping we can make some progress, not just so I can be happier with my purchase but so so many others with this motherboard can be.


Lemon Wolf 11-26-2017 05:59 AM

Greetings,
i found my way here to this forum because of issues with the ROG Zenith Extreme.
The Asus product support for the Zenith Extreme is disappointing to say the least.
I bought this new platform right when it came out and things started out terrible.
The Ram i bought didnt work with the Zenith Extreme, no configuration worked. I couldnt even enter the bios, so i had no choice to return it and get another, different ram kit.
Gaming performance and performance in general was so terrible, even my notebook yielded better FPS despite me using a 1080Ti.
I again found help here by discovering that the Asus Ai Suite was the software responsible for this dreadful performance but not before i reinstalled windows 3 times.
Why did Asus release this faulty software in the first place? Dont they have a test lab?
To this date i am unable to use my Ram at its default speed of DDR4 3600 because of Bios issues.
The latest Bios on the support page is from mid August. Whats the deal with that? Other vendors already released final versions with the latest AGESA code.
Why cant Asus do the same. I paid more than 500€ for this board and i really expected better support. Back in the 90s Bios support was faster than this.
I bought a lot of Asus products including my monitors and the graphics card but this terrible support makes me think that it might me time to switch vendors completely.

Naeem 11-26-2017 06:03 AM

None of AMD Motherboards are working as they have to even after 6 months ryzen motherboards does not have stable enough bios , there are bugs in every single one of them i think asus does not have enough people working for them right now and they put their hands in everything now they can't finish anything

Kyozon 11-26-2017 06:11 AM

Very well said @ENTERPRISE. A much needed thread to address our frustration with the current status of the Board.


I don't think i have much to add on as of currently, with the exception of my frustration with the Old AGESA that we are stuck with and the Many important features that are Disabled on the BIOS there.


I can only hope that ASUS will listen and provide better support for this Motherboard, more ASUS people on the Zenith Thread as there seems to have lots of them on Intel's ones would help too.


Thank you for pulled trigger, it needed to be done.

TrixX 11-26-2017 06:43 AM

I'll have to add myself to this, really disappointed there's been no movement on the BIOS front for months now. 0801 is old news and leaves many things unfinished. Not to mention that we still can't run AI Suite at all due to it's inherent ability to break everything in Win10 (HPET being the culprit I believe).

The L33t 11-26-2017 08:04 AM

I am in full agreement with @ENTERPRISE.

There is no excuses that I would find acceptable in this particular Zenith situation.None.

Asus is a very big company, actually the biggest "in this game" and if they manage to find resources to design and assemble and put out the door this products, they can also find such resources on the software front. They have to, one does not work without the other.

Smaller vendors have managed to have x399 motherboards more stable and with updated AMD code (AGESA).

Asus likes to release motherboards with a myriad of functions only to then never have them working properly. Zenith is a clear case for this.

I understand having a platform like the ROG Zenith with extended options for the overclocker on top of everything else can at times get complicated, specially on a new platform, but this was their option, no one obligates them to release products in such a way. But those options are what they advertise, and are what we paid for. So they better stand by them.

On this product official page we cant find the most updated bios (BETA), only a BIOS from the release month of the Threadripper platform. Just imagine some clients that do not frequent this forum and do not see or want the BETA bios..... and even those are lacking in quantity or quality, it's not like those BETA bios are "the good stuff".

We cant also find the most updated AISuite, Aura and other software that actually exists, just not posted or distributed correctly.

Same for the drivers.

If this is what ASUS has to offer on the ROG platform and what we should expect, them I'm afraid this is going to be my last Asus product, not only my last Asus motherboard, mostly because I find this absolutely disgraceful and in some ways pure false advertisement looking at the product page.

If I treated my clients this way I'd be finished, ASUS is lucky to enjoy a pretty dominant position so they can do this, but that will catch up one day. Be sure.

RoBiK 11-26-2017 09:43 AM

+1

ASUS why???

mumford 11-26-2017 10:21 AM

Frak. I just odered this board on Thusday. You guys are scaring me already.

TheGovernment 11-26-2017 10:38 AM

I'm in the same boat. The support for this board is non existent. The flagship board should get the most attention, not the least.

The L33t 11-26-2017 10:42 AM

Quote:
Originally Posted by mumford View Post

Frak. I just odered this board on Thusday. You guys are scaring me already.

Hopefully you got a better deal than most who got it on "day one". This board was severely discounted during black Friday on Amazon. Like 350$ if I remember correctly.


All times are GMT -7. The time now is 10:12 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.