Overclock.net - An Overclocking Community

Overclock.net - An Overclocking Community (https://www.overclock.net/forum/)
-   AMD Motherboards (https://www.overclock.net/forum/11-amd-motherboards/)
-   -   Asrock X470 Taichi OC and info questions (https://www.overclock.net/forum/11-amd-motherboards/1696417-asrock-x470-taichi-oc-info-questions.html)

Moparman 05-17-2018 01:28 PM

Asrock X470 Taichi OC and info questions
 
Ok I'm starting this thread as i don't see one on this board. I picked one up that will be here later this week with a 2700x. I'm seeing who else has it and the type of setup and overclock you're getting so post below with settings you're using. Also any benches would be great.

Still waiting on board and cpu to come ( 5-21 eta)

Mobo Asrock X470 Taichi
CPU Ryzen 7 2700x OC TBD
Ram 2x8gb Team Dark pro 3200C14 Bdie OC TBD
PSU PCP&C Firestorm 1050w gold
NVME OCZ RD400 128
SSD 2x Adata SU800 256GB in raid0
Hdd 2x 1tb WD blue
Cooling Ex360 with 6 fans in push pull, Xspc Pro block and D5 pump
Gpu Msi 980ti Gaming with Aio Will be testing SLI also

Moparman 05-17-2018 01:28 PM

OK update 6-24-18

I have been running for some time now and found the sweet spot for my setup. 4.3ghz 1.392v under load with 3400C14 mem.
Now something i have noticed is that if I run [email protected] it runs about 3c-5c hotter than if i'm at 1.392v under load so no idea.

Juuhuu 05-18-2018 08:14 AM

Hey, I got new setup yesterday with 2700X, Taichi and gskill Ripjaws V 3200 C14 bdie.
Memory is running at 3200, didn't do any CPU OCing yet.

Moparman 05-18-2018 11:46 AM

Quote:

Originally Posted by Juuhuu (Post 27417905)
Hey, I got new setup yesterday with 2700X, Taichi and gskill Ripjaws V 3200 C14 bdie.
Memory is running at 3200, didn't do any CPU OCing yet.

Nice care to post pics or any cpu benches? Also would like to see Sandra memory bandwidth and Latency bench if you don't mind.

Juuhuu 05-18-2018 01:44 PM

https://www.overclock.net/forum/246-a...mm-height.html

here is my thread that started with buying cooler for a small case and ITX board but ended totally different lol

I do those benches in sisoft sandra? I used that software long time ago.. I haven't done any OC last 10 years..

AlphaC 05-20-2018 04:27 PM

1 Attachment(s)
In case anyone plans on running Linux GPU passthrough I saw this today:


IOMMU
Attachment 195377

Juuhuu 05-20-2018 05:29 PM

Moparman did you receive board? When you boot, do you have long (10-15sek) black screen before bios/boot menu comes? Like motherboard is waiting for components and then screen turns on.

Here are benchs. Need more info?

https://gyazo.com/94999792b8492f28791e096c5a6af2f0.png

https://gyazo.com/b18a9556e01029b70d9c7862374997e3.png

TechCF 05-21-2018 08:25 AM

I got my Taichi Ultimate yesterday. Fired it up with a 2700X and a F4-3600C16D-16GTZR kit. Unable to overclock memory at all without CSM activated. Boots to windows at 3600cl16, soc 1.1v, dram 1.39v - but not entirely stable yet. Any tips would be appreciated.

Ndii 05-22-2018 04:06 AM

3 Attachment(s)
Can you check if you have a serious memory bandwith lose if u set vcore and cpu frequency via bios too.
Bios 1.35A or 1.1

Stock+xmp, Ryzen Master + xmp, 4ghz 1.3v via bios + xmp

Moparman 05-23-2018 01:44 PM

3 Attachment(s)
Ok I did set mine up yesterday but only had about an hour to play with it. I did notice that on boot it cycles sometimes 2 to 3 times like it's training. As I only had stock cooler on but so far so good mem is at [email protected] right out of the gate and 1.35v on it. Cpu i only played with at 4.1ghz on all cores. Mem went higher but again I didn't have much time with it. Something to note that I was not sure on. SLI is supported even when using NVME I was worried about this since the Nvme uses X4 pcie3.0 More testing to come. I did run Ceni R15 kinda sucked ended up with 1883.


All times are GMT -7. The time now is 07:01 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.