Overclock.net - An Overclocking Community

Overclock.net - An Overclocking Community (https://www.overclock.net/forum/)
-   NVIDIA Drivers and Overclocking Software (https://www.overclock.net/forum/71-nvidia-drivers-overclocking-software/)
-   -   BIOS Request: Gigabyte GV-N98TWF3OC-6GD (https://www.overclock.net/forum/71-nvidia-drivers-overclocking-software/1710964-bios-request-gigabyte-gv-n98twf3oc-6gd.html)

wysiwygbg 10-16-2018 07:14 PM

BIOS Request: Gigabyte GV-N98TWF3OC-6GD
 
Hello people :).

I need the original BIOS for the upmentioned video card, for some reason Gigabyte doesn't provide it on their site :(. If someone have this card, please use the GPU-Z utility to upload its original BIOS to their site and post a message in this thread when you're done, so I can look for it.

Gigabyte GV-N98TWF3OC-6GD

I can see here that this BIOS is supposedly for this card, however it says "1 DVI-I" under Connectors, when the card obviously has 2, so this BIOS probably is not the original one.

Thank you very much in advance.

The Pook 10-20-2018 10:23 AM

Does a version of the card exist with only one DVI? It's likely just listed wrong.

Even so, mismatched/incorrect outputs won't necessarily make a BIOS non-functional, just the ports that are missing/aren't addressed won't work.

wysiwygbg 10-24-2018 08:30 AM

I believe there is only one version of this card (with 2 DVI ports), because I don't see other revisions on Gigabyte's site. That's why I think the BIOS to which I posted a link in my first post is not the official one. I hope that someone else (except me) have such card, and that he/she has the skills to click 5 times in GPU-Z to upload the original BIOS.

I have checked all 980Ti cards on Gigabyte's site, and this one (GV-N98TG1-GAMING-6GD) has the same outputs as my card, but I am not sure if I should flash my card with it. Currently my card is flashed with this one, but sometimes I lose picture for a moment or indefinitely while on 1080p60hz or 4k60hz (on the display itself, because if I connect with TeamViewer, I can see that everything is working fine), however on 1080p120hz I never lose picture on the display, which is really strange. If it may be of consequence, I'm using the HDMI output.

Also I have tested this - the same display used with the integrated Intel GMA UHD 630 at 1080p60hz or 4k30hz (the GPU doesn't support 4k60hz) never loses picture, using the same HDMI cable.

Does anyone use the GV-N98TWF3OC-6GD with the GV-N98TG1-GAMING-6GD BIOS? Is it safe and will it work?

Moparman 10-24-2018 09:15 AM

Why not just download one from Techpowerup? Any of the G1 bioses will work on that card.

https://www.techpowerup.com/vgabios/...emSize=&since=

wysiwygbg 10-24-2018 10:05 AM

Quote:

Originally Posted by Moparman (Post 27683064)
Why not just download one from Techpowerup? Any of the G1 bioses will work on that card.

https://www.techpowerup.com/vgabios/...emSize=&since=

Actually this was my question in the previous post - will my card work with the G1 bioses...

So, thank you for the answer, I will try flashing it with one of these, most probably with the F4 from the Gigabyte site, because it is the verified official version for the G1. I hope it won't show any incompatibilities.

Moparman 10-24-2018 03:30 PM

You can also ask the Gigabyte Hardware rep on here GBT-Matthewh I'm sure he will tell you the same that the bios will work.
https://www.overclock.net/forum/memb...-matthewh.html

ProDoctoR1987 11-16-2018 01:31 PM

Quote:

Originally Posted by wysiwygbg (Post 27671372)
Hello people :).

I need the original BIOS for the upmentioned video card, for some reason Gigabyte doesn't provide it on their site :(. If someone have this card, please use the GPU-Z utility to upload its original BIOS to their site and post a message in this thread when you're done, so I can look for it.

Gigabyte GV-N98TWF3OC-6GD

I can see here that this BIOS is supposedly for this card, however it says "1 DVI-I" under Connectors, when the card obviously has 2, so this BIOS probably is not the original one.

Thank you very much in advance.


Hello there, well your in luck I just needed some tools here for tweaking the fans in the bios of my card.

I even kept the original 1.

Here it is :

https://ufile.io/pg7dq


All times are GMT -7. The time now is 11:57 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.