Overclock.net - An Overclocking Community

Overclock.net - An Overclocking Community (https://www.overclock.net/forum/)
-   AMD Motherboards (https://www.overclock.net/forum/11-amd-motherboards/)
-   -   ASUS releases new AMD B450 motherboards: ROG Strix B450-E, TUF B450(M)-Pro (https://www.overclock.net/forum/11-amd-motherboards/1711010-asus-releases-new-amd-b450-motherboards-rog-strix-b450-e-tuf-b450-m-pro.html)

eric98k 10-17-2018 10:12 AM

ASUS releases new AMD B450 motherboards: ROG Strix B450-E, TUF B450(M)-Pro
 
ASUS ROG Strix B450-E Gaming

ASUS TUF B450-Pro Gaming

ASUS TUF B450M-Pro Gaming

Major changes over original launch models:
  • Enhanced VRM & heatsink (double Vcore stages?)
  • Better DRAM support: DDR4 3533
  • Premium Wireless Connections (Intel 9260)
  • Premium Audio support: S1220A
  • Additional M.2

ROG Strix B450-E VRM:
https://dlcdnimgs.asus.com/websites/...ance/power.jpg

AlphaC 10-17-2018 03:28 PM

It's pretty obvious it is meant to compete with MSI's B450 Tomahawk/Pro Carbon.

Whether that will be realistically possible without a proper doubling scheme using their current suppliers is unlikely without using powerstages.

TUF is still garbage, it only has 3 audio jacks so even if the codec is ALC1220 (labeled S1200A , suggested 108dB SNR) it probably has a terrible implementation. The ATX one also lacks a type-C USB 3.1 gen 2.
The specs on the Tuf state "Low RDS(on) mosfet" so it's likely the same thing as before but with slightly more mosfets (i.e. instead of 2x low side , 2x for high side too).

ErrantPigeon 10-18-2018 06:26 AM

While the TUF is garbage compared to what TUF used to be... this might be okay for mATX. Mostly, because most other offerings are rather anaemic and having a decent(ish) heatsink on all MOSFETs alone sets you apart.

These were also not announced anywhere, just the product pages went up. Wonder when they're going to be available and, most importantly, for how much.

gyuuula 04-21-2019 03:13 PM

1 Attachment(s)
Quote:

Originally Posted by AlphaC (Post 27672634)
... so it's likely the same thing as before but with slightly more mosfets (i.e. instead of 2x low side , 2x for high side too).

There is a very small and badly angled picture of the TUF B450 pro with the heatsinks off on the MoBo's page. I think I see 6 group of 4 mosfets on the board. So it is likely the regular 4+2 phase design typical on these boards.


All times are GMT -7. The time now is 10:58 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.