Overclock.net - An Overclocking Community

Overclock.net - An Overclocking Community (https://www.overclock.net/forum/)
-   Other Peripherals (https://www.overclock.net/forum/376-other-peripherals/)
-   -   Random USB (all) Disconnects while streaming on Twitch (https://www.overclock.net/forum/376-other-peripherals/1723948-random-usb-all-disconnects-while-streaming-twitch.html)

EGC 04-07-2019 02:32 AM

Random USB (all) Disconnects while streaming on Twitch
 
I'm using OBS and lowering the bitrate seemed to have helped, 3,000 down to 2,750, but I still get disconnected. Literally all my USB ports drop for a few seconds. I tried turning off USB 3.0, but it didn't work and all it ended up doing was making it to where I wasn't streaming audio from my headset like it usually does. I know it's disconnecting everything because it recognizes my usb drive again and my mouse will go wonky. Not sure if it's me or because I'm using too much power? I don't know. I'm encoding with my GPU, so perhaps that's the issue? It's overclocked as well and I never did check the load it was under during a stream.

Cerberus 04-07-2019 04:41 AM

https://www.overclock.net/forum/rigb...&action=modify

fill out your rig and add it to your sig in userCP

EGC 04-07-2019 09:48 AM

Done.

skupples 04-07-2019 10:11 AM

have you tried reducing CPU OC? Unstable OC used to affect me on my old X79 system.

EGC 04-07-2019 10:40 AM

I haven't thought to do that. I'm only running it at 4.3ghz. Again, I haven't checked the load my computer is under, but the only thing that could affect this if you're considering temps, is my northbridge. Not really sure how to cool that down without spending money on at least a small fan. A heatsink for that thing costs way more than it should. Considering seeing if I can get a small CPU heatsink in which I can somehow attach it to the northbridge since they generally run a lot cheaper. If I wanted to cool it down, would I lower the NB v or the NB CPU v?

Found this when searching for a CPU heatsink. It looks like it will attach to the northbridge. I don't know about the fan, but it is definitely cheaper than anything else I've seen.

https://www.amazon.com/copper-Alumin...4&s=hi&sr=1-25

skupples 04-07-2019 10:41 AM

microsyncs are cheap, just glue a dozen of those on it.

my statement is more towards instability, not overall clock speed. 4.3 can still be unstable, n show signs in many different ways.

EGC 04-07-2019 10:54 AM

Quote:

Originally Posted by skupples (Post 27924884)
microsyncs are cheap, just glue a dozen of those on it.

my statement is more towards instability, not overall clock speed. 4.3 can still be unstable, n show signs in many different ways.

As far as what you're telling me about the heatsinks, I've only ever seen anywhere from $20-$80 and the $20 ones look like they are basically useless and don't come with a fan most of the time. The one I just linked in my previous post costs $9 and is reasonable, made of copper no less.

As far as it being stable goes, I'd say it definitely is. I can always clock it back to see if that helps obviously. 4.2ghz is easily stable I know that, haven't really done a thorough check recently on 4.3ghz.

skupples 04-07-2019 11:03 AM

you could also just bump the voltage by a unit or two.

my last AMD system was the 6 core bulldozer, so its been quite some time.

EGC 04-07-2019 11:09 AM

I haven't checked recently, but the voltage on the CPU fully stable at 4.2ghz is around +0.07v where as mine is set to around +0.15v or something atm.

EGC 04-07-2019 12:49 PM

I lowered my overclock on my GPU to be 100% stable regardless of what's happening, even though it could run 3DMark and Heaven no problems at what it was. Going to lower the clocks on the CPU as well to 4.2ghz and have a bit more voltage then needed and see if that fixes my issue. It's definitely not my internet that's the problem since (even though I am paying for 1mb/s upload) I get an average of 5-10mb/s upload speed and I'm streaming at 2,750. Running it at 3,500 shouldn't be an issue either, but it's managed to be. Literally only does this when I'm streaming.

So, even though I'm not using my CPU to stream with directly, do you really think that's the reason? Not that I don't have a reason not to trust you as you most likely know more than I do.


All times are GMT -7. The time now is 05:39 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.