Overclock.net - An Overclocking Community

Overclock.net - An Overclocking Community (https://www.overclock.net/forum/)
-   AMD (https://www.overclock.net/forum/67-amd/)
-   -   AMD Game & Settings Advisory (https://www.overclock.net/forum/67-amd/1728570-amd-game-settings-advisory.html)

Heuchler 07-03-2019 02:50 PM

AMD Game & Settings Advisory
 
How to Use Radeon Game Advisor

How to Use Radeon Settings Advisor

Heuchler 07-03-2019 02:58 PM

3 Attachment(s)
Division 2

HUB Quality Peformance [4GB or less]
Shadow Quality High High
Spot Shadows High High
Spot Shadow Res Ultra High
Contact Shadows (all) High High
Partical Detail Ultra Ultra
Volmuetric Fog Medium Medium
Refl Quality High High
Local Refl High Off
Sub Surface ON ON
Anisotropic filter 16x 16x
Parallax Mapping ON ON
Ambient Occulsion ON ON
Object Detail 60 30
Extra Stream 10 5
Water Quality High Low
Project Texutre 512 512
High Res Sky Yes No
Terrain High High
Direct X DX12 DX12
Reduce Input Lag YES YES


R9 290 1150c1500m X5670 @4.2GHz [Picture 1]

R9 Fury Nitro 1100c500mem R5 1600 @4.0GHz [Picture 2]

R9 Fury Nitro 1120c500mem R5 1600 @4.0GHz [Picture 3] after updating to 1903


Not meant as a CPU or GPU comparison. Just settings that work for me gaming at 1440p.

Heuchler 07-03-2019 03:06 PM

2 Attachment(s)
Gears of War Ultimate Edition for Windows 10 @ 1440p w/ R9 Fury 4GB HBM
High presets 87 FPS avg using build-in benchmark @ 1440p and 110 FPS @ 1080p

Wuest3nFuchs 07-11-2019 02:19 PM

Das sieht ja mal schick aus bei dir !

Really nice ,no it's more than nice for a fury ,man !!!

Thank you for posting the info ,maybe i put in my r9 fury into my daughters rig.

Heuchler 07-11-2019 08:56 PM

vielen Dank. Fury is a fun card. The Vega Nitro is a really nice card.
I couldn't find a DisplayPort to DVI-D active adapter that do 100Hz at 1440p.
Hope some aftermarket future cards will have DVI port on them else
I will have to grab a new monitor.

Wuest3nFuchs 07-12-2019 02:59 AM

Quote:

Originally Posted by Heuchler (Post 28038456)
vielen Dank. Fury is a fun card. The Vega Nitro is a really nice card.

I couldn't find a DisplayPort to DVI-D active adapter that do 100Hz at 1440p.

Hope some aftermarket future cards will have DVI port on them else

I will have to grab a new monitor.

the cutie pulse pcb !https://uploads.tapatalk-cdn.com/201...bc46c3503a.jpghttps://uploads.tapatalk-cdn.com/201...d4f666bafa.jpg

Gesendet von meinem SM-G950F mit Tapatalk

Heuchler 07-15-2019 12:01 AM

Quote:

Originally Posted by Wuest3nFuchs (Post 28038806)
the cutie pulse pcb !]

Gesendet von meinem SM-G950F mit Tapatalk



zierlich PCB next to that GPU heatsink and the CPU block. Those are some thicc water tubing.

Wuest3nFuchs 07-15-2019 12:38 AM

Quote:

Originally Posted by Heuchler (Post 28043432)
zierlich PCB next to that GPU heatsink and the CPU block. Those are some thicc water tubing.

IT's a bequiet silentloop 240.
On computerbase somebody posted that the pump of this silentloop is dead after 1.5 years. i hope mine does run longer, since i've planned to put it into my homeserver.

Gesendet von meinem SM-G950F mit Tapatalk

Heuchler 07-15-2019 02:26 AM

Wonder why I never seen it for sale here.

"Product not available in your country"
https://www.bequiet.com/en/watercooler/739


Looks very nice. Wonder if the pump issue is from people having air in the loop and the pump running dry or something else.

Wuest3nFuchs 07-15-2019 02:52 AM

Quote:

Originally Posted by Heuchler (Post 28043538)
Wonder why I never seen it for sale here.



"Product not available in your country"

https://www.bequiet.com/en/watercooler/739





Looks very nice. Wonder if the pump issue is from people having air in the loop and the pump running dry or something else.

maybe mine has a kind of Schluckauf sometimes.

My Plan is to fill it up and put a cpc schnellkupplung between pump an radiator.

Gesendet von meinem SM-G950F mit Tapatalk

Heuchler 07-16-2019 02:26 PM

Quote:

Originally Posted by Wuest3nFuchs (Post 28043554)
maybe mine has a kind of Schluckauf sometimes.

My Plan is to fill it up and put a cpc schnellkupplung between pump an radiator.

Gesendet von meinem SM-G950F mit Tapatalk

Sounds like a good idea. My Eheim pump has been bombenfest for 10+ years before took apart my aquarium.
Every time my Swiftech H240-X makes a loud noise I'm under the desk with a flash light.
Silentloop 240 with a push-pull configuration option would be nice.

Wuest3nFuchs 07-21-2019 02:10 AM

I opened up the fillport on the BQ SilentLoop 240 and there was not much to refill, it's just bad bleed .
Before i replaced the CPU Block i put on some thermal paste from noctua the NT-H2 from here https://noctua.at/en/products/thermal-grease/nt-h2-3-5g .
Really good paste.

Heuchler 07-24-2019 12:19 AM

NT-H2 looks like really good TIM. Thermal Grizzly Kryonaut made a big improvement on my AIO cooled Sapphire R9 290 but part of it was from cleaning out all the dust in the radiator and more mounting pressure on G10.
I have the Kryonaut on my Fury Nitro with a undervolt and overclock and does go over 58°C

Nowadays TIM on GPUs seems more important than on CPUs to me.

How is the Vega 56 Pulse running ?

Wuest3nFuchs 07-24-2019 12:36 AM

Quote:

Originally Posted by Heuchler (Post 28057288)
NT-H2 looks like really good TIM. Thermal Grizzly Kryonaut made a big improvement on my AIO cooled Sapphire R9 290 but part of it was from cleaning out all the dust in the radiator and more mounting pressure on G10.

I have the Kryonaut on my Fury Nitro with a undervolt and overclock and does go over 58°C



Nowadays TIM on GPUs seems more important than on CPUs to me.



How is the Vega 56 Pulse running ?

yeah man it is a great product.
I'm afraid of damaging the hbm when disassembling the fury nitro and even on vega56 pulse.
I played around with the pulse and sometimes i get a white screen when hbm is overclocked to 950mhz and when monitor goes to idle, it happens all of a sudden but not everytime. i also don't think it has something to do with the monitor, cause i didn't had this issue when using fury nitro. But it could easily be fixed by turn on/off monitor.
Another possibility could the Win 10 update from 1803 to 1903 and with that i also switched from the fury to vega56 .

Yesterday i tried to oc the core to 1620 and also hbm to 950mhz ,while playing pubg i've noticed that the overclock did something strange.The mouse was moving to the right side.
Had to test out further,and hopefully i can narrow it down.
i've got the moving mouse problem fixed , it was the Xbone Controller :o

Gesendet von meinem SM-G950F mit Tapatalk

Heuchler 07-25-2019 12:12 AM

1 Attachment(s)
If I remember correctly flashing the Vega 64 BIOS allowed more voltage to the Samsung HBM2 on the Vega 56 card - to get it stable above 950 MHz (1.35v instead of the 1.25v it seems).

I'm not sure which BIOS one would flash on to the Pulse (VEGA Nano PCB and none standard VRM) but the VEGA BIOS thread should have all the answers
https://www.overclock.net/forum/67-a...vega-bios.html




undervolting should allow Vega to boost a little higher while running cooler

https://www.hardwareluxx.de/index.ph...ting-test.html
https://www.computerbase.de/2018-03/...as_winzige_pcb


All times are GMT -7. The time now is 07:11 PM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.