Overclock.net - An Overclocking Community

Overclock.net - An Overclocking Community (https://www.overclock.net/forum/)
-   AMD Drivers and Overclocking Software (https://www.overclock.net/forum/70-amd-drivers-overclocking-software/)
-   -   How to unlock MSI Afterburner (https://www.overclock.net/forum/70-amd-drivers-overclocking-software/677696-how-unlock-msi-afterburner.html)

Murlocke 02-26-2010 09:46 AM

Is there a way that I can set my core below 555MHz? I'm trying to set my 2D clocks to 400/900, but the lowest core voltage it allows is 400/900.

S.O.S 02-26-2010 10:15 AM

open msi after burner folder
open msi AfterBurner.cfg

[Settings]
Skin = default.usf
StartMinimized = 0
StartWithWindows = 0
RememberSettings = 0
FirstRun = 1
FirstUserDefineClick = 1
FirstServerRun = 1
HwPollPeriod = 1000
MMIOPageSize = 4
PCIBusFilter = -10h
ShowTooltips = 1
ShowHints = 1
PauseInSuspendedMode = 1
CurrentGpu = 0
Sync = 1
AttachMonitoringWindow = 1
MonitoringWindowOnTop = 1
ShowPerformanceProfilerStatus = 0
LCDFont = font4x6.dat
LCDScrollTimerPeriod = 30
UnlockVoltageControl = 0
UnlockVoltageMonitoring = 0
ShowOSDTime = 0
RestoreAfterSuspendedMode = 0
StartupViaTaskScheduler = 0
StartupDelay = 0
MinMonitoringGraphHeight = -1
LocalizationDebugFlags = 0

[ATIADLHAL]
EnableUnofficialOverclocking = 1
AccessibilityCheckingPeriod = 0

[NVAPIHAL]
ClockDomainIdWorkaround = -1

then restart the program
and go on

Fifth 02-26-2010 12:45 PM

^what he said, then go into settings and tick "unlock gpu voltage control"

Murlocke 02-26-2010 12:56 PM

Launching MSI Afterburner with that setting enabled results in a BSOD everytime I launch the program.


Fifth 02-26-2010 01:26 PM

Quote:
Originally Posted by Murlocke View Post
Launching MSI Afterburner with that setting enabled results in a BSOD everytime I launch the program.


I was getting a similar problem, every time I hit apply to set the clocks I would bsod, try here http://www.evga.com/FORUMS/tm.aspx?m=125438 and see if that fixes it for you. It did for me!

Fear of Oneself 02-27-2010 06:50 PM

perhaps you need an MSI card? just throwing that out there.

Cause for me, i didn't even have to restart the program, it just ripped to 1ghz right after i enable unofficial overclocking (i obviously had to move the slider)

bradyapba 02-27-2010 06:51 PM

just set your 2d profile in afterburner to stock. It will use your VC default and will downclock to its 2d profile, while is like 133/300 or something to that effect. Set your 3d profile to the OC you want to use. Done!

Fifth 02-27-2010 09:01 PM

Quote:
Originally Posted by Fear of Oneself View Post
perhaps you need an MSI card? just throwing that out there.

Cause for me, i didn't even have to restart the program, it just ripped to 1ghz right after i enable unofficial overclocking (i obviously had to move the slider)

Nope, it doesn't have to be an msi card, my 5770 that is xfx works fine in afterburner

k-y 03-15-2010 09:02 AM

Quote:
Originally Posted by Murlocke View Post
Launching MSI Afterburner with that setting enabled results in a BSOD everytime I launch the program.

Murlocke, I was in the same situation (Win 7 x64) until I opened up the Properties for the AfterBurner .exe and clicked on the Compatibility tab then set it to Windows XP SP3 and now it runs w/o BSOD.

Still can't get the clocks right, so I am using AMD GPU Clock Tool to control the frequencies and AB to do monitoring/voltages.

Slightly skewed 03-15-2010 10:44 AM

Quote:
Originally Posted by Fifth View Post
I was getting a similar problem, every time I hit apply to set the clocks I would bsod, try here http://www.evga.com/FORUMS/tm.aspx?m=125438 and see if that fixes it for you. It did for me!
+1. I was having issue's the same as OP and the above 'trick' worked.

See my thread. https://www.overclock.net/ati/689033-...ing-5870s.html


All times are GMT -7. The time now is 12:48 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.