General Information
CPU
Intel Core i7 920
Manufacturer: intel
Core Speed: 4.0 GHz
Bus Speed: 3438.0MHz
Multiplier: 21.0x
Rated FSB: 191.0MHz
Voltage: 1.376V
L1 Data Cache: 4 x 32 KBytes, 8-way set associative, 64-byte line sizeKBytes
L1 Instruction Cache: 4 x 32 KBytes, 4-way set associative, 64-byte line sizeKBytes
Level 2 Cache: 4 x 256 KBytes, 8-way set associative, 64-byte line size KBytes
Level 3 Cache: 8 MBytes, 16-way set associative, 64-byte line size KBytes
Idle Temperature: 41 Celsius
Load Temperature: 74 Celsius
Manufacturer: intel
Core Speed: 4.0 GHz
Bus Speed: 3438.0MHz
Multiplier: 21.0x
Rated FSB: 191.0MHz
Voltage: 1.376V
L1 Data Cache: 4 x 32 KBytes, 8-way set associative, 64-byte line sizeKBytes
L1 Instruction Cache: 4 x 32 KBytes, 4-way set associative, 64-byte line sizeKBytes
Level 2 Cache: 4 x 256 KBytes, 8-way set associative, 64-byte line size KBytes
Level 3 Cache: 8 MBytes, 16-way set associative, 64-byte line size KBytes
Idle Temperature: 41 Celsius
Load Temperature: 74 Celsius
Motherboard
X58A-UD7
Revision: 13
Revision: 13
GPU
NVIDIA GeForce GTX 275
Manufacturer: nvidia
Memory: 896 MBytes
Core / Graphics Clock: 648 MHz
Shader / Processor Clock: 1440 MHz
Memory Clock: 1152 MHz
Manufacturer: nvidia
Memory: 896 MBytes
Core / Graphics Clock: 648 MHz
Shader / Processor Clock: 1440 MHz
Memory Clock: 1152 MHz
RAM
OCZ
Size: 2 GBytes
Speed: PC3-8500F (533 MHz)
Voltage: 1.50V
Refresh Cycle Time (tRFC): 74
Command Rate (CR): 1T
OCZ
Size: 2048 MBytes
Speed: PC3-8500F (533 MHz)
Voltage: 1.50V
OCZ
Size: 2048 MBytes
Speed: PC3-8500F (533 MHz)
Voltage: 1.50V
Size: 2 GBytes
Speed: PC3-8500F (533 MHz)
Voltage: 1.50V
Refresh Cycle Time (tRFC): 74
Command Rate (CR): 1T
OCZ
Size: 2048 MBytes
Speed: PC3-8500F (533 MHz)
Voltage: 1.50V
OCZ
Size: 2048 MBytes
Speed: PC3-8500F (533 MHz)
Voltage: 1.50V
Operating System
Windows 7 64bit
Case
Thermaltake
Temperature: 25 Celsius
Temperature: 25 Celsius
Cooling
Gigabyte Water Cooling
Power Supply
Coolmax 800W
My first build which was intended for and focused on MS Flight Simulator X.
I studied each component, configuration, all compatibilities, requirements and everything about the project for around 3 months before I became comfortable and aware of the different setups out there. I studied the possibility of an overclock before continuing on with the build.
That was back in 2008, i7 first generation.
I studied each component, configuration, all compatibilities, requirements and everything about the project for around 3 months before I became comfortable and aware of the different setups out there. I studied the possibility of an overclock before continuing on with the build.
That was back in 2008, i7 first generation.
Rig Information
Rig Type
Gaming
Ownership Status
Currently Owned
Continue with Google
