[Official] - X58 Xeon Club - - Page 1501 - Overclock.net - An Overclocking Community
View Poll Results: How many years have you owned your X58 - Tylersburg platofrm?
More than 1 year 72 11.65%
More than 2 years 32 5.18%
More than 3 years 45 7.28%
More than 4 years 61 9.87%
More than 5 years 118 19.09%
More than 6 years 290 46.93%
Voters: 618. You may not vote on this poll

Forum Jump: 

[Official] - X58 Xeon Club -

Reply
 
Thread Tools
post #15001 of 15203 (permalink) Old 03-05-2020, 06:37 AM
 
xxpenguinxx's Avatar
 
Join Date: Jun 2010
Posts: 2,382
Rep: 73 (Unique: 59)
2Rx8 is your best bet for compatibility. Check your local listings for older server hardware. Registered ECC RAM should work with the Xeon as long as it's 2Rx8. The Samsung kits ending in CH9 and YK0 have some overclocking headroom.

Without Ebay it's going to be tough. I'd also look for 8GB sticks. There were a lot of 1600mhz 8-8-8 and 1866mhz 9-9-9 kits in that size.

Going Blue
(20 items)
My Minecraft Box
(14 items)
CPU
Xeon X5690
Motherboard
EVGA 132-BL-E758
GPU
Gigabyte GTX 1080 G1 Gaming
RAM
Crucial Ballistix Tactical 3x8GB
Hard Drive
Kingston V300 120GB
Hard Drive
Seagate Sata II 1TB
Hard Drive
WD Sata II 500GB
Hard Drive
Crucial MX200 500GB
Hard Drive
Samsung 960 EVO 500GB
Power Supply
Seasonic SS-660XP2
Cooling
EK-KIT L360
Case
NZXT H440 White
Operating System
Windows 7 Ultimate SP1 64bit
Monitor
AOC Agon AG271QX
Keyboard
IBM Model M
Mouse
Logitech g400
Mouse
SteelSeries QcK
Audio
HD598
Other
CyberPower PFC
Other
MNPA19-XTR 10gb
CPU
Intel Xeon X5650
Motherboard
Asus Rampage II gene
GPU
Radeon HD 2400
RAM
Crucial Balistix DDR3 1600 16GB
Hard Drive
500GB WD
Hard Drive
3TB Seagate Barracuda
Hard Drive
Crucial MX200 250GB
Hard Drive
4TB Seagate
Power Supply
Seasonic G Series 550W
Cooling
Phanteks PH-TC12LS
Case
Fractal Design ARC MINI
Operating System
Windows 2008 R2 SP1
Other
Intel E1G44ET2 Gigabit Ethernet Card 4 x RJ45
Other
Mellanox ConnectX-2 MNPA19-XTR
▲ hide details ▲
xxpenguinxx is offline  
Sponsored Links
Advertisement
 
post #15002 of 15203 (permalink) Old 03-05-2020, 09:16 AM
New to Overclock.net
 
nofearek9's Avatar
 
Join Date: May 2019
Posts: 110
Rep: 1 (Unique: 1)
1866 and 9-9-9 nice .

Asus Rampage IV Black Edition,Intel Xeon [email protected],7ghz,Corsair XMS3 64GB DDR3(8x8),Samsung 950 PRO 256GB,EVGA GeForce RTX 2070 XC GAMING 8GB,Lian Li PC-60FNWB ,Corsair Gold AX750PSU,Noctua NH-D15 .
Asus Rampage III Gene,Intel Xeon [email protected] 4,5ghz,Corsair XMS3 24GB DDR3(3x8),Samsung 950 PRO 256GB.
Register your evga products.
Buy evga products with discount 5%-10%
nofearek9 is offline  
post #15003 of 15203 (permalink) Old 03-05-2020, 03:34 PM
New to Overclock.net
 
Join Date: Mar 2020
Posts: 3
Rep: 0
thnx xxpenguinxx thats the kinda info I've been trying to validate

Now If I was just starting out here this is what I found locally
https://www.usedvictoria.com/classif...K-HDD_35377077

I am almost tempted to get it & part it out but my location is not central to anywheres so likely be stuck with it all but the memory I steal out of it.
Even though it holds the right type of memory I'm after.
from the spec sheet with UDIMM installed max is 12x4g modules @ 48g so to have 96 installed they must be 8g each or not a full load with 16g modules @ pc3-10600
But for those here lurking for a X-5675 lead there's a pair for ya .
Goldguru is offline  
post #15004 of 15203 (permalink) Old 03-06-2020, 01:44 AM
New to Overclock.net
 
croky's Avatar
 
Join Date: Sep 2017
Posts: 158
Rep: 4 (Unique: 2)
Quote: Originally Posted by Goldguru View Post
from the spec sheet with UDIMM
I don't know if you're aware but the server in that link uses registered ram (RDIMM) which works with the 5520 chipset without any problem. Your board uses a X58 chipset, which makes it a lottery to work with such registered ram.

Don't like ebay, ok. What about ali express or similar ? There are plenty of ddr3 ram over there.
croky is offline  
post #15005 of 15203 (permalink) Old 03-06-2020, 06:27 AM
 
xxpenguinxx's Avatar
 
Join Date: Jun 2010
Posts: 2,382
Rep: 73 (Unique: 59)
I've had success with RDIMM that are 2Rx8. So has OP, if you can find their posts.

Aliexpress usually takes 2 weeks minimum to ship. Some countries have extra importing fees. It might even take longer with the virus outbreak.

Going Blue
(20 items)
My Minecraft Box
(14 items)
CPU
Xeon X5690
Motherboard
EVGA 132-BL-E758
GPU
Gigabyte GTX 1080 G1 Gaming
RAM
Crucial Ballistix Tactical 3x8GB
Hard Drive
Kingston V300 120GB
Hard Drive
Seagate Sata II 1TB
Hard Drive
WD Sata II 500GB
Hard Drive
Crucial MX200 500GB
Hard Drive
Samsung 960 EVO 500GB
Power Supply
Seasonic SS-660XP2
Cooling
EK-KIT L360
Case
NZXT H440 White
Operating System
Windows 7 Ultimate SP1 64bit
Monitor
AOC Agon AG271QX
Keyboard
IBM Model M
Mouse
Logitech g400
Mouse
SteelSeries QcK
Audio
HD598
Other
CyberPower PFC
Other
MNPA19-XTR 10gb
CPU
Intel Xeon X5650
Motherboard
Asus Rampage II gene
GPU
Radeon HD 2400
RAM
Crucial Balistix DDR3 1600 16GB
Hard Drive
500GB WD
Hard Drive
3TB Seagate Barracuda
Hard Drive
Crucial MX200 250GB
Hard Drive
4TB Seagate
Power Supply
Seasonic G Series 550W
Cooling
Phanteks PH-TC12LS
Case
Fractal Design ARC MINI
Operating System
Windows 2008 R2 SP1
Other
Intel E1G44ET2 Gigabit Ethernet Card 4 x RJ45
Other
Mellanox ConnectX-2 MNPA19-XTR
▲ hide details ▲
xxpenguinxx is offline  
post #15006 of 15203 (permalink) Old 03-06-2020, 09:48 AM
New to Overclock.net
 
croky's Avatar
 
Join Date: Sep 2017
Posts: 158
Rep: 4 (Unique: 2)
Quote: Originally Posted by xxpenguinxx View Post
I've had success with RDIMM that are 2Rx8. So has OP, if you can find their posts.
I keep what I said: It's a lottery. Bottom line: Can you reassure Goldguru it will work ?

I've bought such ram and it didn't work: HP 2GB 2Rx8 PC3-10600R DDR3-1333 ECC REG RDIMM 500656-B21 501533-001 500202-061. It also depends on the motherboard and even on BIOS version.

What OP has to say about this issue in particular is non important because it's misleading. OP never ever told anyone about ram brand and model. Even after being asked about it.

Quote: Originally Posted by xxpenguinxx View Post
Aliexpress usually takes 2 weeks minimum to ship. Some countries have extra importing fees. It might even take longer with the virus outbreak.
Don't they sell ddr3 and aren't they not ebay ?

Did Goldguru even complained about anything related to what you refer ?
croky is offline  
post #15007 of 15203 (permalink) Old 03-06-2020, 12:09 PM
New to Overclock.net
 
Join Date: Mar 2020
Posts: 15
Rep: 0
Quote: Originally Posted by Goldguru
GA-EX58-UD3R rev 1.o & ONLY 4 SLOTS here.
as option for 4slot & 4DIMM => 2х4Gb+2х8Gb or 2х2Gb+2х4Gb or .. 2хZGb + 2х(Z*2)Gb

about ECC Reg - (1R&2R)x8+PC3(PC3L not work for mе on Gigax58 & work on x79 RAMPAGE IV FORMULA)
Attached Thumbnails
Click image for larger version

Name:	CPU& 4+2+2+4.jpg
Views:	26
Size:	984.9 KB
ID:	331090  

Click image for larger version

Name:	1366(no) vs1366(yes)_1R&2R.jpg
Views:	15
Size:	357.8 KB
ID:	331094  


Last edited by BOBKOC; 03-06-2020 at 12:36 PM.
BOBKOC is offline  
post #15008 of 15203 (permalink) Old 03-06-2020, 02:10 PM
New to Overclock.net
 
Join Date: Mar 2020
Posts: 3
Rep: 0
Thnx for the replies.
It would seem that for the ram to work it must be
R2x8
512mb x 64 x 8 is the max module size of 8 gig.
ECC must be Unbuffered Not registered

I found a guy here who installed one of the original 48 gigs on a pt6 board
GRANDADMIRALTHRAWNS TECHNOLOGY
http://wp.xin.at/archives/880

the reading I did there last nite is where I came up with the above,many have come & asked direct questions regarding
Memory as well as other questions on the X58 platform.
I did locate a local source for 4 gig sticks however 2-4 weeks delivery $ up frt.
these are Gskill low density looking over the reviews F3-1600C11S-4GNT
seems the quality was in question back in 2013-15 however recent reviews appear everybody happy.

As for the server I listed I wont be buying it on a chance it has what I need it likely has ddr3 8500 in it @ best pc3 1333,it was just proof they are still out there for cheap.
I'm looking for some pc3 1600 to get me past my 165 BLK, my kingston 1333 value ram may if I loosened the timings & raised the Vdimm but unlikely to be stable.

Valid available part numbers as of today
G,Skill
F3-1600C11S-4GNT 1x4
F3-1600C11D-8GNT 2x4g

F3-1600C11S-8GNT 1x8
F3-1600C11D-8GNT 2x8

Kingston
KHX-1866C10D3/8G
KVR1333D3N9/8G

there is also a place called data micro systems which have a huge selection of all types of modules
mostly server but some non ecc I forgot to ask if the enquiry I made if the ECC was unbufferd
"We do not differentiate between 1Rx8 or 2Rx8 on our DM50 668. It can be either but my current stock is all 2Rx8"
$19.95 per 4gig stick DM50 668
$24 per 1866 ECC unregistered DM61 788-1 he's checking on if it is 1r or 2R
located in New Hampshire
https://www.datamemorysystems.com/ddr3-memory/
10600 & 12800 non ecc only 1,2,4,8, gig models very cheap
seems the 8 gig are 1024 x 64 so NOGO there but ok up to 4g.
which suits for me.

Thx Gold
Goldguru is offline  
post #15009 of 15203 (permalink) Old 03-09-2020, 04:06 AM
Tweaking since 386 era
 
MaddogMcCree's Avatar
 
Join Date: Jun 2016
Location: Amsterdam
Posts: 46
Rep: 1 (Unique: 1)
Quote: Originally Posted by theister View Post
W3680 and W3690 are the "best" cpus, cause they have "open" multipliers for both cpu clock ... Else you can try some of the higher X-Series, but the X5690 is still kind of overpriced compared to the X5680.
thanks for explaining that!

Last edited by MaddogMcCree; 03-09-2020 at 04:10 AM.
MaddogMcCree is offline  
post #15010 of 15203 (permalink) Old 03-09-2020, 07:43 AM
New to Overclock.net
 
theister's Avatar
 
Join Date: Sep 2015
Posts: 160
Rep: 3 (Unique: 3)
Quote: Originally Posted by bonet69 View Post
How much qpi voltage do you need for north bridge 4400 Mhz and ram 2400 Mhz???? Also, how much ram do you have?

Regards
it`s 1,39 at voltage read point. 3 sticks.
theister is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off