Search Results for ‘msi’

Just built a new system with various hardware (see below). When i push the power button it takes a very long time for the system to get to Windows. After i had finished putting everything together i booted the system up. Nothing happened. The lights came on, the fans started going but that was...

Posted in wrong channel

I’m not sure if I’m having hardware issues or what’s going on but when I’m running HWiNINFO64 my core clocks aren’t pushing past 5.3Hz? I ran Cpu-Z on a single thread and still only 5.3MHz mind you this is with XMP disabled and running stock no OC at all. I thought the max boost frequency is...

Hey all. I'm putting together a new build and I'm looking to get into overclocking for the first time. Wondering which of these two boards would overclock better with DDR5: MSI Z690 Carbon or the MSI Z790 Edge. On paper, the Carbon has some advantages. It's an 8 layer board compared to the 6...

Hello Board MSI Z690 Carbon with the latest 7D30v1A BIOS and previous BIOS 7D30v19 would sometimes not boost all cores, running Windows 11, happens on previous builds as well, had this problem with the board since I got it . The only the solution would be for me to restore BIOS defaults, boot...

CPU: 12900k MOBO: MSI MPG Z690 EDGE WIFI DDR4 COOLER AIO: Liquid freezer arctic 360mm RAM: Patriot Viper Steel (4x8gb) DDR4 4000 CL19 GPU: RTX 3080TI SUPRIM X MSI Hello everyone, Changed, bought some new components and the new rig is more or less described above. As almost everyone else, I...

Great condition card. Here's a cheap way to max out 1080p!!!

Hello! I apologize in advance if this gets a bit long winded.. I am working on a brand new build with a custom water loop; I have installed everything including my EKWB distro plates and water blocks. Each EKWB component has a 5v D-RGB cable (3 in total). I bought a 5v D-RGB cable splitter to...

So I have a 5950x paired with an MSI X570S Carbon Max WiFi I can run 100% stable (tasted hours of cinebench r23, OCCT and aida stresstest) When I manually set all the cores to 4.7Ghz No issues what so ever. But this has the negative of being "slow" at single core or "few" core loads When I...

So I've been shadowing the forum for a while and never posted, but I finally need help I can't source myself. I want to push my MSI 3070 TI Ventus 3X 8G OC further, as my curve and temps are at the best I can achieve within the default VBIOS power limit. About to install a corsair custom loop...

Hello all, I just finished my first build and have been reading through everything I can to fix my issue.. to no success. My last effort is yall. ISSUE: MSI Z690 Tomahawk shows CPU BOOST enabled in BIOS, I got my ram showing correct at 3600 but the CPU has been stuck at base speeds. I built...

Personal gaming card in excellent condition. The card has spent its entire life under water; Stock cooler was never used (no dust), so it looks great. Fresh Arctic Silver TIM was applied to the GPU, stock cooler and backplate reinstalled, it looks great, very clean. Never had any problems with...

Hello, I have a strange problem with starts up , but with a delay. When I turned on with a screwdriver it was the same. Bios is the newest watch the video: https://forum.benchmark.pl/uploads/monthly_2022_02/video-1645102701.mp4.5de406fa37dc7c624b68fb05b5010c0a.mp4 Cpu::Intel Core i5-12400...

I'm new to the overclocking world. I went for msi z690a wifi d4 version after looking at the reviews saying this was the best board for the price. I have 12700K installed on it. I bought crucial ballistix 2x8GB DDR4 CL16 3600 Mhz RAM. The ram runs well on the default 2666 Mhz, but I get BSODs...

I have an MSI Z690 Force/Carbon motherboard. I've noticed that when I use a negative voltage offset in "Adaptive + Offset" mode or Advanced Offset Mode, the offset is only applied to the cores (P-cores and E-cores), but not to the ring. Because Vcore is always set to MAX(Pcore_voltage...

Hello! By mistake I installed on my rx5600xt MSI X GAMING video board a bios of my other XFX rx5600xt video board. The board turns on but does not give a video signal, try to fix it by putting it on my main computer and using the ATIflash, but the program does not detect the video board...

Hi. I got a msi 6800 xt gaming x trio. Yesterday i do my routine 6 month full rig cleanup (re apply all thermal paste and dust cleaning because my house have a lot of dust even my air conditioner need to be clean 3 monthly) so when i put it all together my pc boots up but when loading windows it...

Hello, I bought a case Gaming Spirit Of Gamer Ghost 5 ARGB Edition, it has two 200 mm and one 120mm case fans, and it is accompanied by an ARGB hub which has cables outputs ( 3pins RGB & VGD, 4pins PWM). Fans are pre-configured in the Hub. (To be honest i could not find the brand of the hub to...