[jaykaybay]

I've overclocked my Ph II x4 965 to 4.2 Ghz (200x21) with a Noctua NH-C14 and I get idle temps of 35-38c and prime95 temps of around 61-65c. Is this safe for a 24/7 oc?

 

[omni_vision]

me gusta

 

[jaykaybay]

So helpful

 

[Hog]

Your load temps look a little higher than what I personally run. The volts are ok providing you drop your temps some.

 

[Diabolical999]

You're fine up to 1.55v on Phenom II.

 

[jaykaybay]

So, should I bring it down to 4.0 or leave it?

 

[Dustin1]

Quote:

Originally Posted by jaykaybay;15339507
I've overclocked my Ph II x4 965 to 4.2 Ghz (200x21) with a Noctua NH-C14 and I get idle temps of 35-38c and prime95 temps of around 61-65c. Is this safe for a 24/7 oc?

Look's good. Just stay below 1.55 and try to get your temps lower and you'll be set!

Goodluck bud!

 

[jaykaybay]

At a stable 4.0Ghz (200x20) 1.50v It doesn't go above 55c, and idles at 29-32.
Keep it?

 

[Dustin1]

Quote:

Originally Posted by jaykaybay;15339658
At a stable 4.0Ghz (200x20) 1.50v It doesn't go above 55c, and idles at 29-32.
Keep it?

Well, that's up to you. Are those decent, acceptable temps for you?

Sent from my DROID BIONIC using Tapatalk

 

[jaykaybay]

I think that they are fine, what do you guys think?

 

[Dustin1]

Quote:

Originally Posted by jaykaybay;15339690
I think that they are fine, what do you guys think?

I approve. Seems like a nice spot to let it ride at.

Sent from my DROID BIONIC using Tapatalk

 

[Hog]

55c is a good max temp for prime. I would keep it at 4.0.

 

[MrTOOSHORT]

55'C should be the max along with 1.55v max.

But it'll still last you a few years anyways. Might have to up the voltage a tad over time because of degradation.

Myself would leave it and keep the 4.2GHz.

 

[Tarun]

Try to oc ur pc to max but done cross 1.55 v without proper cooling ur current HSF needs to be change with some thing like a H100 or cm V10 that with provide u cool temps i guess ur chip may die if it continues these temp 65c is th Tj max for phenom happy Oct

hope that helped