[Diffident]

I run Universe on all rpi's. I wonder how much bunkering I can do on them.

 

[Diffident]

I'm bunkering on all 8 rpi's. They all have 32GB SD cards, so they all have plenty of storage.

Considering it's only a Pi, it's not a big bunker. My 8 rpi's are good for a total of around 110k ppd.

 

[Diffident]

I'm not liking the Javelin. I still have unfinished tasks of Numberfields left that I was just going to bunker for the second day, but they all expire the day before.

 

[Diffident]

move them

 

[Diffident]

I've been able to add the project on 2 machines, trying to add it to my 2P crashes boincmanger for some reason.

 

[Diffident]

I hope my desktop can make it till the end. I have a clog somewhere in my water loop. I barely have any flow. I put a couple drops of die in my res and hardly any of it has made it through the loop.

My CPU is currently sitting at

Tdie: +59.9°C
Tctl: +79.9°C

This morning when I woke up the Tdie was at 39°C like normal, but it's been climbing all day. It's good as long as it doesn't get any worse. I had this problem a couple months ago, the CPU block was totally clogged from using Pastel fluid in the past. I cleaned it as best as I could, but I couldn't get all the crud out of the micro channels....guess I'm going to have to break down and buy a new block.


My VII is in the same loop, surprisingly, the junction temp is only at +65.0°C while steady crunching Amicable.

 

[Diffident]

damn. I had an EK block do the same some time ago, I was able to clean the "jet" channels with a suede (brass) brush after soaking in white vinegar. Mine clogged with some kinda white muk. never figured out what that was.

The white muk would have been plasticizer if you were using flexible tubing.