[KhaoticKomputing]

Title says it all, I have exhusted my google-fu with no luck. I cant seem to find any proof that the fans will fit. I'm mainly worried about the center fan location and the fan clips...would I have to mod/make my own fan clips or is there fan clips that will fit? couldnt find a silver arrow owners club or anything lol thanks!

 

[Gahzirra]

"You can install up to three 120mm fans, 140mm fans or their 160mm fans on the Silver Arrow. Three 38mm fans are supported as well." Mid way down the page linked

http://www.gnd-tech.com/content/315-...-Numbers-Shown

A better view
http://www.frostytech.com/articlevie...id=2568&page=2

 

[KhaoticKomputing]

Here is the dumb question, Coolers like the megahelms have a diff mounting clip for 38mm wide fans. Is this the same for the Silver Arrow? or are the Clips a one size fits all?? I gess if I had to I could make some out of XLG paper clips, right? Just want to dot my i's and cross my t's befor I drop a nice chung of change on this cooler and san ace 1011's

Thank you for your post and clicky's!

 

[Gahzirra]

Ahh a fellow San Acer. Those fans rock...picked mine up from SVC

The Silver arrow only comes with 3sets of 25mm fan clips. You can fab your own really easy. I did it, took less than 5 minutes to make a set. Pick up some solid metal wire 18-19 gauge from Hardware store, some needle nose pliers and use the 25mm as your guide you will just need to add like an inch to accommodate the thicker frame. Screenshot of mine below...

http://www.svc.com/silverarrow.html

Side note: I need to get some more San's I got a Yate loon Med for a bottom intake as the space is a 140mm going to switch it out for another San. They move so much air and undervolting them still kicks the YL (at full speed) in terms of CFM.

 

[KhaoticKomputing]

Quote:

Originally Posted by Gahzirra Ahh a fellow San Acer. Those fans rock...picked mine up from SVC The Silver arrow only comes with 3sets of 25mm fan clips. You can fab your own really easy. I did it, took less than 5 minutes to make a set. Pick up some solid metal wire 18-19 gauge from Hardware store, some needle nose pliers and use the 25mm as your guide you will just need to add like an inch to accommodate the thicker frame. Screenshot of mine below... http://www.svc.com/silverarrow.html Side note: I need to get some more San's I got a Yate loon Med for a bottom intake as the space is a 140mm going to switch it out for another San. They move so much air and undervolting them still kicks the YL (at full speed) in terms of CFM.

I Just orderd 2 1011's from SVC.com!! Right now my pan is to get a Silver Arrow and stick 3 1011's on it. replace ALL my case fans with 1011's and i orderd this
http://www.newegg.com/Product/Produc...-075-_-Product
I plan to run all the fans though this guy, ill the get 3.5 version if that guy cant handle all those 1011's. Im also wanting to paint them up, and add some LED's (I kinda fancy some orange LED's like thishttp://forums.bit-tech.net/showthread.php?t=200959 ) and wire up all the LED's on the fans to the LED power button on the CM690IIAD case

ive thought it all out man lol...ohh yea...swap the LED's on the rheosmart to orange aswell lol.

 

[Gahzirra]

Looks awesome good luck with the mod!