Overclock.net banner
1 - 20 of 23 Posts

·
Premium Member
Joined
·
4,046 Posts
Discussion Starter · #1 ·
Well I just got my chip to 3.93GHz, I am posting a SS as well as a CPU-Z validation link, I cannot seem to get it to 4GHz but don't know the in's and out's of the board yet, the chip is also for sale if you are interested
 

·
Premium Member
Joined
·
4,046 Posts
Discussion Starter · #6 ·
I am sure it can go higher I just don't know what to set for CPU VTT and PLL as well as the GTL reference voltages, it will post at 4GHz but BSOD's before I get to the desktop

EDIT> This is a 780i so my ram is set independently, its running at 800MHz
 

·
Registered
Joined
·
1,265 Posts
is that a stable oc or just good enough to boot into windows.

EDIT: whoops didnt see post above ^^
 

·
Premium Member
Joined
·
4,046 Posts
Discussion Starter · #14 ·
Quote:


Originally Posted by microman
View Post

what i can say with an extensive knowledge of Q6600's is this, stable or not that chip has massive potential.

Well I just tested stability and it didn't BSOD but by the time a minute had passed temps were up to 80C and I stopped the test. The Xiggy, while a good cooler cannot cool a chip this hot. I will be getting WC soon and will be trying again but my 24/7 will remain 3.6GHz at 1.344v where my temps stay under 60C
 

·
Senior Member
Joined
·
15,778 Posts
Quote:

Originally Posted by skatingrocker17 View Post
I can't do 3.4 at any voltage. And nice overclock by the way.
Same here. Been at 1.55 @BIOS but nothing...
 
1 - 20 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top