Overclock.net banner

3200+ Venice @ 2.6, cant get above 2.7!

508 8
Heya guys! I've hit a wall
I'm pretty sure the problem lies in either my budget ram or my psu. here are my settings..

Httx3
HTT-260
vcore-1.55
ram voltage-2.5

I'm running a devider and no matter how high or low i make it i just cant get the cpu past 2.7! I upped the vcore to 1.60 and even 1.65 and i still cant get it to run higher then 2.7.. Any ideas? I'm running a 350watt psu and two sticks of ram, one 256meg and one 512 both ddr400 budget ram..

Thnx Guys!
1 - 3 of 3 Posts

· Registered
Joined
·
183 Posts
Discussion Starter · #8 ·
Oh dam that sucks, i'm getting watercooling soon as well so that along with new ram and a new psu should fix it i hope. My ram doesn't like going over it's stock voltage either so i think that could be a limiting factor as well. The max temp i get to is 38c at the moment.

Thnx alot guys.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top