Overclock.net banner
1 - 13 of 13 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Prime 95 (didn't run for very long since I was just trying to grab the temps):

IBT/idle temps:


I'm using AS Ceramique 2 since that was the best my local Microcenter had, and I haven't had a chance to really order anything good online.
Ambient temperature is ~22.5C.

Is it just me or do these temps look a bit high?
 

·
✔️
Joined
·
1,585 Posts
Why didn't you just use the stock tim on the h100i? I don't think your temps are that bad considering your voltage. My 3770k got upto 81°C with H100 in push/pull and [email protected]

Edit: Your idle temps are very high though. I think you should try remounting just incase.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
I must have seated it really poorly the first couple of times. Reseated it and now IBT was 83C on the hottest core, and prime is running mid 60s.
 

·
✔️
Joined
·
1,585 Posts
83°C is acceptable for 3570k on IBT. How are your idle temps now?
 

·
✔️
Joined
·
1,585 Posts
Still a bit high, propably because of the bad TIM. But I guess it doesn't matter because your load temps seem to be OK.
 

·
Premium Member
Joined
·
6,214 Posts
Quote:
Originally Posted by enigma7820 View Post

how can you tell idle temps are high if you don't know his ambient temp. those idle temps might be fine if its hot in your place.

want the best temps delid that chip and overclock higher.
snip
Quote:
Originally Posted by potam View Post

Prime 95 (didn't run for very long since I was just trying to grab the temps):
snip
IBT/idle temps:
snip

I'm using AS Ceramique 2 since that was the best my local Microcenter had, and I haven't had a chance to really order anything good online.
Ambient temperature is ~22.5C.

Is it just me or do these temps look a bit high?
*EDIT* and potam, did you notice you lost gflops as you clocked higher? whats going on ? the first ibt run is usually the slowest...
 

·
✔️
Joined
·
1,585 Posts
Quote:
Originally Posted by enigma7820 View Post

how can you tell idle temps are high if you don't know his ambient temp. those idle temps might be fine if its hot in your place.
Maybe because he posted the ambient temp. Maybe you shoud learn to read the starting post before posting odd accusations.
 

·
Registered
MSI
Joined
·
1,537 Posts
That idle HOT temp is just like in my place
biggrin.gif
I live in a HOT country.
 

·
Registered
Joined
·
3 Posts
It seems a bit high to me im at 4.4ghz, h70 and here are my temps after a few mins.. i ran a 4 hr test of prime blend and highest it got was 72 on one core
 

·
Registered
MSI
Joined
·
1,537 Posts
Quote:
Originally Posted by Spenzer View Post

It seems a bit high to me im at 4.4ghz, h70 and here are my temps after a few mins.. i ran a 4 hr test of prime blend and highest it got was 72 on one core
I think it is quite good temp with H70 spenzer
smile.gif
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top