Overclock.net banner
Cancel

3d code??

398 Views 11 Replies 5 Participants Last post by  Luda, 
K
hey guys I just booted up my computer and I'm getting a 3d code what does that pertain to?
Reply
Save
Like
1 - 12 of 12 Posts
K
also im getting a f5 error code as well on my 780i ftw
Reply
Save
Like
K
i just got off the phone with evga. and i said to him that i uplugged every component out of my mobo execpt for the cpu/heatsink and he said that there might be something wrong with my q6600? im like it worked on the last rmaed board and why not this one? and he said that there might be bent pins and im like this is just insane. so im ready to go with a new mobo... im prolly not going back to evga.. suggestions will be taken
Reply
Save
Like
R
Sorry, can't help with that... just wanted to say Honda Rocks!!!
Reply
Save
Like
R
Quote:


Originally Posted by killin
View Post

i just got off the phone with evga. and i said to him that i uplugged every component out of my mobo execpt for the cpu/heatsink and he said that there might be something wrong with my q6600? im like it worked on the last rmaed board and why not this one? and he said that there might be bent pins and im like this is just insane. so im ready to go with a new mobo... im prolly not going back to evga.. suggestions will be taken


Can you boot into BIOS?
See less See more
Reply
Save
Like
K
Quote:


Originally Posted by Russkiy
View Post

Can you boot into BIOS?

i cant even get it to post. or beeps with memory out.. im thinking this is a DOA
See less See more
Reply
Save
Like
T
Check your motherboard manual for stop codes and what they pertain to. If you don't have a manual check online.
Reply
Save
Like
K
Quote:


Originally Posted by tindolos
View Post

Check your motherboard manual for stop codes and what they pertain to. If you don't have a manual check online.

i did and they said reserves
See less See more
Reply
Save
Like
D
http://www.bioscentral.com/postcodes/phoenixbios.htm
3D = Load alternate registers with CMOS values

You said that you got an F5 as well. How did you get to that F5 as that is near the end of POST?

How much memory do you have installed? Boot with just one.
Reply
Save
Like
K
Quote:

Originally Posted by DuckieHo View Post
http://www.bioscentral.com/postcodes/phoenixbios.htm
3D = Load alternate registers with CMOS values

You said that you got an F5 as well. How did you get to that F5 as that is near the end of POST?

How much memory do you have installed? Boot with just one.
at first i installed 2x1gb of my old corsair xms2, then i tried 1 and that didnt work
See less See more
Reply
Save
Like
K
anyone else would like to give it a whirl? or is it time to rma and sell the board?
Reply
Save
Like
Luda
  • try all the different slots with each chip.
  • unplug the machine, pull the cmos battery, leave it unplug for 10-15 minutes, power cycle it [hit the power button a few time when it is unplugged]
  • pull everything out, including the board, double check your Stand offs, make sure their are no wires touching the board or its components
  • reseat the proc.
Reply
Save
Like
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Overclock.net
A forum community dedicated to overclocking enthusiasts and testing the limits of computing. Come join the discussion about computing, builds, collections, displays, models, styles, scales, specifications, reviews, accessories, classifieds, and more!
Full Forum Listing
Explore Our Forums
Hardware News Intel CPUs PC Gaming NVIDIA Water Cooling
Top