Overclock.net banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,227 Posts
Discussion Starter · #1 ·
Hey guys,

I'm @ 4.5ghz stock voltage. HEre's my specs

Gigabyte UD7
Corsair Vengance DDR3 @ 1600mhz
NOctura DH14 cooler

I've ran prime95 and stressed the cpu gets to 49C idle around 23C.

So far I still have the regular stock shipping bios. if I put the mulitplyer @ 50X it boots but won't load windows same thing at 48x. Wonder any suggestions that you can give is there a multipler problem with the default bios etc? shold I bump pll voltage up a bit and try?

http://valid.canardpc.com/show_oc.php?id=1591846
Thanks
 

·
Registered
Joined
·
710 Posts
I'm idling at around 30C. What cooler you using? And what voltage?

As far as your issue goes, have you messed with any of the power saving features?
 

·
Premium Member
Joined
·
6,988 Posts
Quote:


Originally Posted by joey2162
View Post

4.5 stable @ those temps isnt enough?, thats amazing , leave it alone

CPU-Z is reporting the wrong voltage. That's his Vtt voltage. CPU-Z 1.56.2 fixes that issue with Gigabyte boards.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top