congrats,mate....great results.....
but why the noticeable difference in memory temps??
but why the noticeable difference in memory temps??
4850+Accelero S1+2 120mm Fans = Heaven
I wasn't satisfied with the accelero s1 r2 temps and I wasn't going to buy the turbo kit which has two measly looking fans. So I decided to add some fans that I had laying around in my closet and the result, well just take a look.
edit: I forgot to get pictures of the temps with just the Accelero, but I think it was somewhere around GPU 59 C and MEM 66 C IDLE and loads temps approached 80ish.
Pictures Galore!
![]()
![]()
![]()
IDLE
![]()
After 1:24 minute of ATI artifact scanning
![]()
After 2:24 minutes of ATI artifact
scanning
![]()
edit: I forgot to get pictures of the temps with just the Accelero, but I think it was somewhere around GPU 59 C and MEM 66 C IDLE and loads temps approached 80ish.
Pictures Galore!
IDLE
After 1:24 minute of ATI artifact scanning
After 2:24 minutes of ATI artifact
scanning
6
1 - 12 of 12 Posts
First let me say this: Nice mod
![]()
Two things:
Why did you place the fans so they'd pull air from the PCB -> Outward? Why not grab the cooler air from the case and force it down?
Get some compressed air
![]()
Two things:
Why did you place the fans so they'd pull air from the PCB -> Outward? Why not grab the cooler air from the case and force it down?
Get some compressed air
2
Quote:
I have no clue, my case is always open so I thought pulling the hot air out would be better. Do you think it would be better if I switched it around?
Originally Posted by justarealguy  First let me say this: Nice mod
Two things: Why did you place the fans so they'd pull air from the PCB -> Outward? Why not grab the cooler air from the case and force it down? Get some compressed air
|
3
Works well the S1 with a 120mm (or two!) fan doesn't it
![]()
Just wish there was room in my case for the fans to come back now I have 2 8800GTs in SLI. They are running hotish but not too hot, better with the fans tho'
![]()
Nice mod
![]()
(that's Guinness today)
Just wish there was room in my case for the fans to come back now I have 2 8800GTs in SLI. They are running hotish but not too hot, better with the fans tho'
Nice mod
3
im going to by accelero S1 rev2 too
![]()
im just wondering should i buy noctua P12 or S12? or just 2x some cheaper fans?
Quote:
I just pulled these fans from my junk box. The Noctua's are very nice, I would go with them. I bet they move more air and are my quieter than the ones I have right now.
Originally Posted by twiztidclown im going to by accelero S1 rev2 too
|
2
Yeah, I would flip those fans around to blow onto the card. Or better yet, just give the card to me...
![]()
Hi guys!
I've got the same card and a similar setup, only I just put one 120mm S-Flex on my Accelero S1 rev.2 cooler. Here are the results running ATiTool for 6 mins, and right afterward, all inside my new HAF 932:
I've got the same card and a similar setup, only I just put one 120mm S-Flex on my Accelero S1 rev.2 cooler. Here are the results running ATiTool for 6 mins, and right afterward, all inside my new HAF 932:
2
1 - 12 of 12 Posts
