Overclock.net banner

1 - 4 of 4 Posts

·
Registered
Joined
·
690 Posts
Discussion Starter #1
Ok so this was my ticket.,,,

I would like to know why my Card wont work at the factory OC. This is the reason i bought the card, for the factory OC. To run my card with no Grey screen of death ( with stripes) i have to reduce the clock to 850/1200. I am not happy, if you could advise me what to do that would be great. I have asked my supplier about getting a replacement but they want to charge me to test my card for defects and i do not believe that this is protocol. thank you

And this was their reply,,

P/N:288-1E140-100SA

SKU#11161-03

Only

Please download the atiflash tool that only can use under pure dos mode here -

http://www1.sapphiretech.com/global/lib_files/40.zip

Then check the SOP step1 to step7 to make a bootable USB stick that can help to boot into pure dos mode -

http://www1.sapphiretech.com/global/lib_files/103.zip

Please help to update this latest VBIOS here at first -

http://www1.sapphiretech.com/global/lib_files/132.zip

After booting into pure dos mode , please type below command after prompt

atiflash -p 0 140X0300.TS2 -f

Thanks.

ok
 

·
Registered
Joined
·
690 Posts
Discussion Starter #2
ok so i flashed it and then uninstalled then reinstalled CCC and the driver. And it happened again GSOD(with stripes)... but this time i could hear music in the background?
 

·
Registered
Joined
·
22 Posts
Did this fix actually work?

I contacted Sapphire regarding my GSOD with the same card and got the exact same reply from them?

Did it actually work?
 

·
Registered
Joined
·
13 Posts
Quote:
Originally Posted by ThaJoker;9933969
ok so i flashed it and then uninstalled then reinstalled CCC and the driver. And it happened again GSOD(with stripes)... but this time i could hear music in the background?
I have the same card check mobo settings pci-e slot set to 1.8 volts and 100 for speed i had the same issue and this fixed it
 
1 - 4 of 4 Posts
Top