Overclock.net banner
1 - 1 of 16 Posts

· Registered
191 Posts
I already took the whole cooler apart about a week ago and also found a cloth and removed it. I also put new arctic paste on it, but I left the thermal pads on the memory. A week later my GPU now runs at 58°C and Highest Load temp I got was 82°. I had OC'ed it to 412/1100 and it ran fine till yesterday. And now it even hangs while playing DoD:S with stock rates (350/1000)

Should i remove the cooler again and also remove the thermal pads and apply arctic paste on both the GPU and the memory?

P.s. I've order an Arctic Cooling NV Accelero X1. So after that the problems should be solved. Untill then I'm open for ideas
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.