[alias 86]

I've 3 24" screens running eye-infinity, what OC should I aim for so I can run at near max or max setttings?

The 6950 (x3) are unlocked and WC, i've a good setup 360 rad 6 fans etc (only gpus are cooled, ram is passive so can't go mad), temps never above 50 with fans at a quite level

at the mo i'm runing at 900/1350 @ 1.175v

i've just used racer x to setup CCC. and i'll be running this 24/7 so i don't want to got too high, it would be nice if it lasted 3/4 years

 

[King Who Dat]

You should have no issues where it is. That's a great setup.

Sent from my Inspire 4g using Tapatalk

 

[daman246]

lol Running eyefinity on BF3 with Cf 6950 at near max settings is impossible even Medium will make these GPu scream for their deaths that resolution is hard to get stable FPs with 6950 or even 6970

 

[Neo_Morpheus]

You should be able to get some good FPS and max settings with your GPU's -on 1 monitor lol

 

[alias 86]

Quote:

Originally Posted by daman246 lol Running eyefinity on BF3 with Cf 6950 at near max settings is impossible even Medium will make these GPu scream for their deaths that resolution is hard to get stable FPs with 6950 or even 6970

there are 3 6950s, they do ok in crysis 2

 

[masustic]

I would think you should be ok with current clocks.

 

[alias 86]

Quote:

Originally Posted by masustic I would think you should be ok with current clocks.

you only say that cos your are higher lol

i'm a noooB but i think u may need to change your cpu is it hurting those cards?

 

[masustic]

Oh yea! Its hurting them badly! I was waiting to check out Bulldozer but I think I will be ordering 2600k and mobo this week

 

[rushthezeppelin]

Are you talking about max settings in beta or the true release max settings? In beta with my 2 x 6950s (stock speeds, not unlocked) and max settings with eyefinity I'm using about 95-98%ish on both cards with up to 93% load on all six cores of my 1100t. Get about 35 fps average in Metro outside. Granted this is Metro and there's no areas with monster view distance. With OC to 6970 speeds I do about 38-40. I'd imagine your 3x6950s should handle it fine with just mild OCs....not sure if you would run into a bottleneck on the 2600k (really no clue....I don't know too much about the 2600k)

 

[ColdCircuitCash]

That's a lot of resolution to Anti Alias for ANY setup. Might have to make some sacrifices.

 

[alias 86]

ok, well this looks like it going to really push my rig.

I could always change one of the 6950 to a 6990, but i think the performance increase would only be like 10 frames but cost 400 pounds

Was talking about the game release grahpic, not beta.

Not too fussy about useing max AA. If i can max res and have everything on high and use x2 aa i would be very happy

 

[Arni90]

Unless you're watercooling, an HD 6990 will achieve lower clocks than two separate cards. Simply because of lower thermal headroom.

 

[evilrazor]

I only have the beta to go by, but with my rig at 5040x1050 I was running 30-45ish FPS with everything set to BETA ultra (so most likely high) and AA post @medium, AA off. Inside i was getting around 70ish. Im hoping with the final release we all see some frame improvements. All I know, im in the market for a 3rd 69x0 card

both 6950's @900/1325
2600k @ 4.6