[lockhead]

hello again guys.

i just want to ask if anybody here tried the 7/16" ID 5/8" OD compression fittings on the XSPC Rasa CPU block. Will two of these fit on the block?

thanks.

 

[Juggalo23451]

You will more than likely need one 45 degree angle fitting on the cpu block so you can use compression fittings

 

[lockhead]

is it this one? http://www.performance-pcs.com/catal...ducts_id=24760

 

[charliehorse55]

I think you should be able to get two of those fittings onto the block, seeing as it supports two compression fittings for 1/2" ID 3/4" OD tubing, which is much larger.

From this review:

 

[lockhead]

Quote:

Originally Posted by charliehorse55 I think you should be able to get two of those fittings onto the block, seeing as it supports two compression fittings for 1/2" ID 3/4" OD tubing, which is much larger. From this review:

wow. thanks for the link.

that helped a lot. +rep