Overclock.net banner

1 - 11 of 11 Posts

·
Banned
Joined
·
803 Posts
Discussion Starter #1
i dunno why but i been hearing alot lately that this mobo cant over clock past 2.9 with my conroe..should i try updating the bios to f6? would that help or not?
 

·
Registered
Joined
·
1,102 Posts
Hey, that's possible... if you haven't tweaked the BIOS yet..

1- You have to turn off EIST and all the other unnecessary crap (except TM2)

2- Give G(MCH) a little +0.1 nudge

3- Set Ram multiplier @ 2

4- The diffrence between F5 and F6 is not all that major, but it did improve the stability of my OC.

Make sure your temps are within reason once you boot into Windows with Intel TAT.

I'm @ 3.2 but with an E6300 (458FSB)... I'm sure you'll breach 400.
 

·
Registered
Joined
·
1,102 Posts
OH... 945-S3 isn't the same game though. The 945 chipset isn't as good an overclocker as the 965... you might be fresh out of luck than.

Can't help any further, don't know enough about this paticular board + chipset.
 

·
Premium Member
Joined
·
10,351 Posts
Careful, i got warned for bumping more than once in 24 hrs. But here's a free bump for you
 
1 - 11 of 11 Posts
Top