Overclock.net banner
1 - 6 of 6 Posts

·
I TeK things...
Joined
·
17,448 Posts
Discussion Starter · #1 ·
Ok I now have a stable A64 3000+ @ 2313mhz on stock HSF...
http://valid.x86-secret.com/show_oc?id=69222

Now my real ? is how high can I get? what else to I need to get there?
I was hoping I could get my newer HSF ordered, buuuttttt my temps are @ a solid 34C with 85% fan idle, goes to about 40C when under load.....maybe after my HSF Tornado conversion I will be @ 2.6-2.7
 

·
Premium Member
Joined
·
4,807 Posts
What settings are you using? How high is your vcore? Have you tried finding the individual maxes of the CPU, RAM, and FSB?
 

·
Registered
Joined
·
1,218 Posts
Winnies are decent overclockers, but no venice
. 2.4 might be your limit, you might be able to get 2.5...but its gonna require some volts..
who knows, you might have a great chip..
 

·
I TeK things...
Joined
·
17,448 Posts
Discussion Starter · #5 ·
ok vcore is at 1.59-1.62 according to Speedfan.....fsb is set at 257.....htt 3x......and unfortunatly the multiplier is locked
oh yeah and I am runnin my ram @ 166mhz div
 

·
Registered
Joined
·
1,218 Posts
what multiplier is locked? the htt multi? Cause you dont need to mess with the cpu multi....watch your temps, you are gettin high on the vcore for that winnie.
I think you are just at the chips wall, unfortunately..you could always get a venice that will get higher...$140

you could also use the 133 divider just so you know that your cpu is the only thing that could be the cause of instability...I would use the 133 and just focus on your chip OC.
 
1 - 6 of 6 Posts
Top