Not at all, just turn off your computer, put the RAM in, start up your computer and adjust any settings that needs to be changed in the BIOS and off you go
![]()
Adding extra 2gb of ram
1 - 7 of 7 Posts
Nope.
![]()
Just put it in the same coloured RAM slot that your current stick of RAM is in to make sure it runs in dual channel mode.
If you've got 2 x 1GB sticks, then you should insert them in two empty same-coloured RAM slots.
Just put it in the same coloured RAM slot that your current stick of RAM is in to make sure it runs in dual channel mode.
If you've got 2 x 1GB sticks, then you should insert them in two empty same-coloured RAM slots.
They shouldn't, no.
There can sometimes be issues with using more sticks of RAM due to it putting more strain on the NorthBridge, but that can usually be solved by upping the voltage ever so slightly.
My bets are that you'll be fine, though.
![]()
Remember this: If you do run into any issues, me, and the people of OCN will be more than happy to help out.
There can sometimes be issues with using more sticks of RAM due to it putting more strain on the NorthBridge, but that can usually be solved by upping the voltage ever so slightly.
My bets are that you'll be fine, though.
Remember this: If you do run into any issues, me, and the people of OCN will be more than happy to help out.
K thanks for your help guys.
![]()
1 - 7 of 7 Posts
