Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
hey guys i would like if you guys can help me out tweaking and adjusting my Ram timings from my BIOS.
These are my settings I haven't modified anything yet.

First Info. Manual Auto
Cas# latency 5 5
Dram Ras# to Cas # Delay 5 5
Dram Ras# Precharge 5 5
Dram Ras# Activate to Precharge Time 15 15
Ras# to Ras Delay Auto 3
Row Refresh Cycle Time Auto 44
Write Recovery Time Auto 5
Read To Precharge Time Auto 3

Second Info.
Read to Write Delay (S/D) Auto 8
Write to Read Delay S Auto 3
Write to Read Delay D Auto 5
Read to Read Delay S Auto 4
Read to Read Delay D Auto 6
Write To Write Delay S Auto 4
Write To Write Delay D Auto 7

Third Info.
Write to Pre Delay Auto 13
Read to Pre Delay Auto 5
Pre to Pre Delay Auto 1
All Pre to Act Delay Auto 6
All Pre to Ref Delay Auto 6

and also whats Ai Transaction Booster?
I you guys can help me on this i will appreciate it a lot! Thankx
 

·
Banned
Joined
·
1,337 Posts
I would recommend running your ram as fast as possible. When you hit the first speed that wont run then worry about changing (increasing) your timings.
 

·
Registered
Joined
·
28 Posts
Discussion Starter #3
well right now my Dram frequency is at 871 and the next value able is 1045 and if i put that it wont boot so o though adjusting my timings would help me on that =/
 
1 - 3 of 3 Posts
Top