Air Cooling HAF 922 - Some basic questions

351 Views 4 Replies 3 Participants Last post by Tom1121, Dec 5, 2009

iscariot

Discussion Starter · Dec 5, 2009

Im going to put what little creditability I have out to roost and ask some very silly questions that I'm pretty sure I already know the answer to but would like some verification:

Verifying a fan is an Intake fan:

If I put a bit of tissue on the case opening where the fan is located and the paper sticks to the case this would intake its an intake fan right?

Making a fan an exhaust fan: This is just a case of placing the fan on the case in such a way that its blowing the air out the case right?

5.25mm Drive bay: I will measure this myself but just thought I'd ask, a 200mm fan will NOT fit in the Drive bay area correct? Only a 120mm is likely to fit.

Thanks.

Save

1 - 5 of 5 Posts

ukic

· #2 · Dec 5, 2009

1. Correct
2. Correct
3. Correct

Though if you notice, your front panel has a 200mm fan so, it will likely fit the drive bays (well zip tying it outside of the bay basically) but you wouldn't get higher benefits plus it will look bad.

Save

Tom1121

· #3 · Dec 5, 2009

Yes you have the exhaust, intake part right. I have a haf 922, and a yate high speed in the 5.25 drive bays, and it cools the ram very nice and blows cold air to the mega.

Save

iscariot

Discussion Starter · #4 · Dec 5, 2009

Quote:

Originally Posted by Tom1121

Yes you have the exhaust, intake part right. I have a haf 922, and a yate high speed in the 5.25 drive bays, and it cools the ram very nice and blows cold air to the mega.

120mm fan?

See less See more

Save

Tom1121

· #5 · Dec 5, 2009

Quote:

Originally Posted by iscariot

120mm fan?

i have 4 of these

http://jab-tech.com/YATE-LOON-120mm-...d-pr-3771.html

2 on the side of the case, 1 and an exhaust, and the other in the drive bay, all on a fan controller for when I need them.

See less See more

Save

1 - 5 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month