Overclock.net banner

1 - 9 of 9 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter #1
i have my pc at 2.23GHz how much more can it handdel . my multiplis are at 13.5 and i 4 got what my fsb was at but can some out tellme what to put them at ? thxs

DC
 

·
Registered
Joined
·
434 Posts
First of all, fill out your system specs. Go to your control panel ('User CP' link at the top of this page in the link/tool bar) and it should be on the left hand side with a few other options, such as setting your avatar and signature. That way we can better help you.

Also, don't mean to be rude, but it would help if you cleaned up your typing a bit so we can make sure we understand what you're saying. I understood you, but just incase in your futures posts, you know?

Also, go to www.cpuid.com and download CPU-Z. It will give you information on your processor and RAM for overclocking, as well as some basic info on your motherboard and graphics card. You also should download a temperature and fan speed monitoring program to make sure your CPU isn't heating up to unhealthy levels. I suggest NextSensor, which you can download at http://cbid.amdclub.ru/
 

·
Registered
Joined
·
24 Posts
Discussion Starter #3
sorry for the speeling i need to go back to school.
i just wanted to know what some outher ppl would put there settings. at if thay had my pc. im not afrade to brack it so any suggestions would be nice.

thxs.
 

·
Registered
Joined
·
434 Posts
Download the programs I told you to download. One will monitor your temperatures (to make sure your system is at a healthy temperature) and the other will show you information on your CPU and RAM. Post a screenshot of the CPU tab and the RAM tab in CPU-Z so we can actually help you
 

·
Registered
Joined
·
24 Posts
Discussion Starter #5
CPU(s)
Number of CPUs 1

Name AMD Athlon XP
Code Name Thoroughbred
Specification AMD Athlon(TM) XP 2700+
Family / Model / Stepping 6 8 1
Extended Family / Model 7 8
Package Socket A
Core Stepping B0
Technology 0.13 µ
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE
CPU Clock Speed 2227.5 MHz
Clock multiplier x 13.5
Front Side Bus Frequency 165.0 MHz
Bus Speed 330.0 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 256 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 2227.5 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits

Mainboard and chipset
Motherboard manufacturer ASUSTeK Computer INC.
Motherboard model A7V8X-X, REV 1.xx
BIOS vendor Award Software, Inc.
BIOS revision ASUS A7V8X-X ACPI BIOS Revision 1010
BIOS release date 04/09/2004
Chipset VIA KT400A rev. 80
Southbridge VIA VT8235 rev. 00
Sensor chip ITE 8712

Graphic Interface AGP
AGP Status enabled, rev. 3.5
AGP Data Transfer Rate 8x
AGP Max Rate 8x
AGP Side Band Addressing supported, enabled
AGP Aperture Size 256 MBytes

Memory
DRAM Type DDR-SDRAM
DRAM Size 1024 MBytes
DRAM Frequency 165.0 MHz
FSB
RAM 1:1
DRAM Interleave 4-way
CAS# Latency 3.0 clocks
RAS# to CAS# 5 clocks
RAS# Precharge 4 clocks
Cycle Time (TRAS) 9 clocks
# of memory modules 2
Module 0 Corsair DDR-SDRAM PC3200 - 512 MBytes
Module 1 Corsair DDR-SDRAM PC3200 - 512 MBytes

Software
Windows version Microsoft Windows XP Professional (Build 2600)
DirectX version 9.0c
 

·
Premium Member
Joined
·
5,332 Posts
Quote:


Originally Posted by dac001

ok


Go in the bios and start raiseing your fsb by 2 or 3 mhz in tell it becomes unstable, keep a eye on the temps, don't go past 55c. under load. if you got good temps under load, then you can increase your vcore a little to get more overclock out of it. 1.7 is safe max vcore with good cooling.
 
1 - 9 of 9 Posts
Top