[skyline_king88]

well i would like some advice on my temps i am running the amd fx 8320 and my temp at 1.5v bios 1.512v windows running prime95 my temps top out at 63 and for a h100 with push pull and pull are ultra kaze 38mm 120mm i thought my temps should be lower..

this is the guide i used to overclock http://www.overclock.net/t/1348623/amd-bulldozer-and-piledriver-overclocking-guide-asus-motherboard

 

[dixson01974]

I'm in the same boat with my 8320 and H100 with 2 AP-15. So I ordered 2 AP-29 and hoping it with help. I may order 2 more if it helps.

 

[skyline_king88]

i dont get the temp problem i had a 6100 @ 4.6 1.55v ran fine at 53 max this is 2 extra cores yes but lower v core

what setting you using and is 4.8 prime stable ?

 

[dixson01974]

I'm using these settings.
CPU Multi x24
CPU Voltage 1.525v in bios
CPU Voltage 1.536v on CPU-Z under load
NB speed 2600
HT speed 2600
My cpu at 4.8ghz max out about 63c with theses setting.

EDIT
About 45 minutes in Prime95 it hits 63c, so I shut it down. Max temp safe is 61c.
Are you mix matching fans? Like Stock fan>Radiator> Kaze fan.

 

[skyline_king88]

Quote:

Originally Posted by dixson01974

I'm using these settings.
CPU Multi x24
CPU Voltage 1.525v in bios
CPU Voltage 1.536v on CPU-Z under load
NB speed 2600
HT speed 2600
My cpu at 4.8ghz max out about 63c with theses setting.

EDIT
About 45 minutes in Prime95 it hits 63c, so I shut it down. Max temp safe is 61c.
Are you mix matching fans? Like Stock fan>Radiator> Kaze fan.

wow that is alot lower i am going to need that for 4.5 what are your llc settings and i hit 60 after 15 themn it levels out
. yes it goes stock push rad kaze.

think the higher cfm is better push then the stock

 

[dixson01974]

Quote:

Originally Posted by skyline_king88

wow that is alot lower i am going to need that for 4.5 what are your llc settings and i hit 60 after 15 themn it levels out
. yes it goes stock push rad kaze.

think the higher cfm is better push then the stock

Give me a minute. I need to reboot and look at my LLC settings.

 

[dixson01974]

OK. The settings I'm using on the LLC part is.
CPU LLC : Ultra High
CPU/NB LLC : High
CPU Current Capability : 130%
CPU/NB Current Capability :130%
CPU Power Phase Control : Extreme
CPU Voltage Frequency : Manual
VRM Fixed Frequency Mode : 400

 

[skyline_king88]

i am using same setting besides cpu voltage frequency is on auto... i have a jnk chip cant get higher then 4.5 with out needing more then 1.55 and i ahve found my temps in folding dont g over 50 but using prime it is way over 60.

 

[dixson01974]

CPU Voltage Frequency can lower your voltage. If I don't set it I need higher voltage on my CPU to make it stable. So set the CPU Voltage Frequency and try lowing your cpu voltage.

 

[TND2pointO]

Quote:

Originally Posted by dixson01974

CPU Voltage Frequency can lower your voltage. If I don't set it I need higher voltage on my CPU to make it stable. So set the CPU Voltage Frequency and try lowing your cpu voltage.

Thanks for the tip, how much voltage were you able to drop after changing this?