Overclock.net banner
1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Processor; fx4100 running stock right now! and stock cooler.
Video; gtx560 ti twin frozr II oc
MOBO; Ms-7641 ver 3.0
PSU; OCZ zs series 650W PSU

So i just replied a thermal paste and i do want to try overclock my processor ! So now when i tried to increase multiplier in bios to 4,0GHz it runs fine in stability test until processor reaches 50 degrees on core and downclocks it self to 1.4 ghz on core while under full load !

cool and quiet disabled
c1e disabled
Any tips ?

Sorry my bad language . I live in Latvia
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #2 ·
Just noticed that TMPIN1 gets high temps under full load . That is north bridge right ? and why it goes so hot under full load it is 70 C and idle as in picture around 44 C !
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top