Overclock.net banner

Any overclocking tips?

314 Views 2 Replies 3 Participants Last post by  tuchan
So I've done a little bit of overclocking on my computer. You can check my profile for specs. I think I've done "ok" but I'm really wondering about voltage. I haven't touched it at all and feel maybe I'm missing out on pushing my system a bit more.

Also, my MB bios is from 2002. I'm sure I'll get a chuckle from a few that read this (or everyone) that it's that old. Will updating it make that much of a performance differance? I've also read all over the place that it can be dangerous to the system if not done right. Any place I can go to get very specific instructions?

Thanks a bunch.
1 - 3 of 3 Posts
yes flashing the bis may give you more options for OCing, and upping the vcore will help too,up the cvore a notch or two and keep an eye on temps... dont let it getover 55c and your fine...
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.