Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hey Clockers. Newb to site here. Its been probably 10+ years since I built a Pc. I picked up this motherboard awile back along with a E6550 cheap. I purchased some crucial dd3 1333 sticks to go along with it and it wouldnt post. I read awile back about having to go into the bios and set up the memory. I finally picked up 1gb of kingston 8500 which im able to boot with and installed a Os. Any direction would be great to get this 1333 memory going.

Thanks everyone
 

·
Premium Member
Joined
·
2,530 Posts
Have you tried updating the BIOS?

Also make sure that the timings, voltages, and frequencies for your memory are manually set correctly in the BIOS.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
Yes the most recent bios. Dont remember how to set memory. looking into it now. not to sure how to go about it. With the 1333 sticks it doesnt post so I cant set bios then. I would have to start in bios with the kingston stick in and set bios for other memory.
 
1 - 3 of 3 Posts
Top