[fRingE]

I am running 41c-43c Idle and max load is about 58c running Prime 95

I have a liquid cooling loop, No push and pull fan arrangement just push.

what is the max safe temps for a AMD 955 and also are these temps ok?

 

[HobieCat]

The max safe temp is 62C, and those temps seem high for a water loop. What voltage are you running?

 

[MrTOOSHORT]

Quote:

Originally Posted by fRingE I am running 41c-43c Idle and max load is about 58c running Prime 95 I have a liquid cooling loop, No push and pull fan arrangement just push. what is the max safe temps for a AMD 955 and also are these temps ok?

58'C is not an alright temp for 24/7.

Keep it 55'C and below for safe keeping. Try and do push/pull with your cooler.

 

[The-Viper2]

I get the same temps with my mugen 2 on 4 ghz so there must be something wrong or u are using way more voltage than me

 

[sean11978]

high ambient temps probly...

 

[fRingE]

Quote:

Originally Posted by MrTOOSHORT 58'C is not an alright temp for 24/7. Keep it 55'C and below for safe keeping. Try and do push/pull with your cooler.

so like the 2 fans on the front of my rad, make one push and one pull?. and I am running stock 3.2ghz and stock 1.35 voltage. I had to use my old mobo till i get my 4890 RMAd

 

[fRingE]

bump

 

[fRingE]

bump

 

[Fooxz]

Quote:

Originally Posted by fRingE bump

You already got an answer... and do not bump more than once per 24 hours.

 

[GMcDougal]

Those temps are not only high for air cooling but they are extremly high for water cooling. The fact that its at stock makes it even worst. I see you do have a c2 revision so it will run hotter than a c3. I would post these temps in the water cooling section for help to bring your temps down.