[Ocnewb]

I just put my new 2500k together last night and everything is up and running now. I'm not very familiar with this new bios and OCing w/ this SB 2500k. I currently set my multiplier to x49, i turned off C3,C9, C1E etc.. I did leave other settings @ stock tho, only changed is the Vcore to offset +0.07 (Vcore on auto). My ram is currently running @ Cas 9 2133 stock. I'm just wondering what should i set my board to (for Vcore and other settings)? I was running Prime for like an hour only, temps were around 63 max under load and the Vcore in CPUZ was around 1.33V and 4.9Ghz. I will run Prime more later when i have time.

 

[Kevdog]

Try this guide http://www.techreaction.net/2011/01/...idge-v0-1beta/

 

[Sushimaster]

wow u got yours to 49 multiplier with just 1,33 v? u have a very good chip man!, got mine to 4,6 ghz with 1, 315 v , that s 0.045 offset, havent push it further tho.

 

[Ocnewb]

During Prime the V moving up and down tho, but never above 1.33V. I'm not sure which option to turn off so the V would stay stable.

 

[clock12]

fixed v [email protected] v+ LLC2 would be that option.
but no more lowering that voltage at idle,so stick with offset if it is a rock solid oc.