Overclock.net banner

1 - 3 of 3 Posts

·
CONES!
Joined
·
1,708 Posts
Discussion Starter · #1 ·
I've been running a single 7970 GHz Edition on this motherboard for about three months now with no issues. Today I received a second 7970 GHz Edition to use for crossfire. I got it all setup and then when I started the computer I got no post. It errors out on q code D4 and then it changes to D7. I have already made sure that the new card works by running it by itself. I had successful boot up with just the new card in the system. I tried running just one card it both of the PCIE slots that I'm using for the crossfire setup. Both slots work with no issues. However, as soon as I try to boot with both cards installed I get no post with the same two q codes.

Does anyone know how to fix this so I can get crossfire running? If you need anymore information please ask.
 

·
CONES!
Joined
·
1,708 Posts
Discussion Starter · #2 ·
Bump! I could really use some help with this!
 

·
CONES!
Joined
·
1,708 Posts
Discussion Starter · #3 ·
I fixed it by clearing CMOS.
 
1 - 3 of 3 Posts
Top